Note: If the return inlets cannot be pointed downward, then you MUST install Zodiac return line diverters. Please call Zodiac for a dealer near you.
FOR POOLS WITH RETURN INLET
DIRECTIONAL FITTINGS
Replace the directional eyeball with Zodiac retrofit eyeball return line diverter and reinstall eyeball retaining ring.
Part #W90153 for 11/2" return lines
Part #W90155 for 2" return lines
IF UNABLE TO ADJUST RETURN INLETS
OR FOR POOLS WITHOUT RETURN
INLET DIRECTIONAL FITTINGS
Use Zodiac universal return line diverter (Part #W24100). Pinch wires together and insert fully into return inlet.
ASSEMBLY
Step 1: Slide the disc over the base of the footpad. Be sure it fits properly in the grooves provided. Be sure to install the disc with “TOP” printed facing up.
Step 2: Slide the wheel deflector onto the female end of the hose. The female end will eventually attach to the Zodiac 1500 head.
Female End
Wheel Deflector
Step 3: HOSE ASSEMBLY | SKIMMER |
Assemble enough hose sections to reach |
|
the farthest point in the pool from the |
|
skimmer, plus one extra hose section. |
|
Step 4: Place the hose protector sleeve over the male end of the hose. Place the hose connector on the male end of the hose.
HOSE | HOSE | FLOWKEEPER™ |
PROTECTOR NET | CONNECTOR | VALVE |
MALE END |
| |
OF HOSE |
| |
FLOWKEEPER™ VALVE
The pool pump provides more gallon per minute flow than your Zodiac 1500™
requires. That's why we provide a way to regulate the flow. The FlowKeeper Valve is 
self adjusting and provides a 
properly. The FlowKeeper Valve MUST BE used.
Skimming action is maintained through a bypass throat in the valve. As the filter collects debris, the valve automatically maintains the correct flow to the cleaner. The FlowKeeper valve comes preset at the two (2) setting. The lower the number, the lower the flow to the cleaner head. Should readjustment become necessary, pull the adjustment handle to raise or lower the setting. There are three total setting options.
To adjust setting, pull and move to desired setting.
5