Genie GTH-1048, GTH-1056 manual Placing a Load

Page 51

OPERATION

PLACING A LOAD

WARNINGB

Do not sway the machine with the boom angle indicator arrow

(B) at more than 0 degrees. By doing so you could cause a roll over hazard which may result in injury or death.

DANGER

Always apply the parking brake (C) before lifting and/or placing a load. Failure to do so could allow the machine to roll over which may result in injury or death.

CAUTION

Always bring the machine to a complete stop before applying the parking brake (C). Failure to do so will damage the parking brake disc packs, which may void the axle warranty.

Before placing a load, the frame should be leveled. This can be done by the use of the switch labeled sway control (D) located on the lower right hand side of the dash panel in front of the operator.

SWAY

CONTROL

Adjust the sway control (D) until the indicator ball on the level gauge (E) is on the 0 degree mark.

4 - 13

Image 51

Contents Operator’s Manual Table of Contents Section Rough Terrain Fork Lift Safety Table of Contents Introduction Rough Terrain Fork Lift SafetyStandards Standards and SymbolsTraining and Knowledge SafetyOperators Responsibilities Managements Responsibilities Maintenance and Repair Operation Safety Rough Terrain Fork Lift Safety Rough Terrain Fork Lift Safety Rough Terrain Fork Lift Safety Section General Safety General Safety Accident Prevention General Safety ProceduresSafety Alert Symbol OperatorWelding Precautions Hand Holds and StepsRefueling Hydraulic Safety Service Tires SafelyFluids Under Pressure Practice Safe Maintenance Boom SafetyUSE Seat Belt Avoid Electrical Power Lines Jump Starting Jump StartingProper Load Chart USE Letter Visible 9000 lbs 7000 lbs 6000 lbs 4000 lbs 3000 lbs Section Controls and Instruments Controls and Instruments Operators Compartment Controls and InstrumentsJoystick Control Functions Joystick Control Functions Button Pushed Parking Brake Service BrakesFrame Sway Control Hydraulic Pump Destroke Button GaugesTransmission SteeringFront Axle Differential Lock Down Front StabilizersJohn Deere Engine Electronic Control Unit Engine Electronic Control UnitBlink Code Diagnostics Fault Codes and Descriptions Section Operation Operation Operation Operation and Safety GuidelinesBefore Starting the Engine Starting the Engine Operation Before Operating the Forklift Operate the frame sway control a momentarily right and left Operation Operation Transporting a Load Operation Placing a Load Operation GTH-1048 & GTH-1056 Operation Section Maintenance Procedures Maintenance Procedures Before Servicing General Safety PracticesFluid Under Pressure Scheduledmaintenance Daily MaintenanceCheck Hydraulic OIL Level Section Material Safety Data Material Safety Data Material Safety Data Sheets Msds Material Safety DataCalifornia California Proposition 65 Warnings

GTH-1048, GTH-1056 specifications

The Genie GTH-1056 and GTH-1048 are robust telehandlers designed for a variety of material handling tasks in construction, agriculture, and industrial applications. Both models are part of Genie’s versatile telehandler range, offering exceptional performance and reliability, making them popular choices among professionals.

The Genie GTH-1056 stands out with a maximum lift height of 56 feet and a maximum lift capacity of 10,000 pounds. This versatility is complemented by its 4-wheel drive and powerful engine, enabling it to traverse challenging terrains with ease while maintaining stability. The GTH-1056 is designed with a compact footprint, facilitating maneuverability in tight spaces, which is crucial on urban job sites and other restricted areas.

On the other hand, the Genie GTH-1048 features a maximum lift height of 48 feet with a maximum capacity of 4,000 pounds. This model is particularly suited for light to moderate lifting tasks, and its lower profile makes it more suitable for applications requiring less lifting height. The GTH-1048 excels in environments where space is at a premium, allowing operators to navigate through crowded job sites without sacrificing performance.

Both models are equipped with advanced technologies that enhance operational efficiency. The full-time 4-wheel drive provides excellent traction in various ground conditions, while their high ground clearance enables them to handle rough and uneven terrain without difficulty. Additionally, both machines feature a comfortable operator’s cabin with optimal visibility, ensuring that operators can maintain awareness of their surroundings while working.

Safety is a key aspect of the Genie GTH series. Both models come with a load management system that ensures compliance with safety regulations by providing real-time feedback on load capacity and machine stability. The integrated stability monitoring system helps prevent tip-over situations by providing operators with essential information regarding the machine's center of gravity.

In conclusion, the Genie GTH-1056 and GTH-1048 are impressive examples of modern telehandler technology, offering a blend of power, versatility, and safety. Their unique features and characteristics make them ideal for a wide range of lifting applications, ensuring operators can work efficiently and reliably across different job environments. With their exceptional performance capabilities, these telehandlers continue to be indispensable assets in various industries.