Crown Audio MA-3600VZ operation manual Parallel-Mono Mode, Control works both channels

Page 10

Macro-Tech MA-3600VZ Power Amplifier

3 Setup

3.6.3 Parallel-Mono Mode

Typical input and output wiring is shown in

Figure 3.8.

INPUTS: Connect input wiring to Channel 1. Refer to Section 3, Figure 3.4 for input connector pin assignments.

OUTPUTS: Install a jumper wire between the positive binding posts of both Channel 1 and Channel 2 that is at least 14 gauge in size; Connect positive (+) speaker lead to Channel 1 positive binding post of amp; connect negative

(–)speaker lead to Channel 2 negative binding post of amp. Refer to Section 3.5 for output connector pin assignments. Make sure the Mode

switch is set to the “Bridge” position when oper-

 

ating in Bridge-Mono mode.

 

NOTE: Turn down (full CCW) the Channel

 

2 level control when operating in Paral-

 

lel-Mono mode, as the Channel 1 level

Figure 3.8 System Wiring, Parallel-Mono Mode

control works both channels.

 

NOTE: Remove the jumper wire before changing to any mode except Parallel- Mono.

NOTE: Crown provides a reference of wiring pin assignments for commonly used connector types in the Crown Amplifier Application Guide available at www.crownaudio.com.

page 10

Operation Manual

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Macro-Tech Series Some models may be exported under the name AmcronImportant Safety Instructions Importantes Instructions de SécuritéCrown International, Inc Safety StandardDeclaration of Conformity Competent Body’s Name and AddressTable of Contents Features How to Use This ManualWelcome Unpack Your Amplifier SetupInstall Your Amplifier Ensure Proper CoolingBalanced Line Choose Input Wire ConnectorsUnbalanced Line Choose Output Wire and Con- nectors Output Connector WiringWire Your System Stereo Mode Bridge-Mono ModeParallel-Mono Mode Control works both channelsOperation Startup ProcedurePrecautions Connect to AC MainsEnable Indicator Front Panel Controls Indicators Dust FilterLevel Control Signal/IOC Indicator Enable SwitchGround Lift Switch Reset ButtonInput Sensitivity Switch PIP ModuleAdvanced Features Options Input Ground Lift Switch Advanced Features and OptionsOptions IQ-PIP-USP2 Adapter and PIP-Lite Module Specifications Weight Power Draw at IdleDimensions Output ImpedanceMinimum Power Matrix Output Impedance Troubleshooting Service Warranty United States & CanadaWorldwide Except USA & Canada Macro-Tech MA-3600VZ Power Amplifier Product Registration This page Intentionally Left Blank Crown Factory Service Information Nature of Problem

MA-3600VZ specifications

The Crown Audio MA-3600VZ is a high-performance power amplifier designed for professional audio applications, particularly in live sound reinforcement and permanent installations. This versatile amplifier is well-regarded for its durability, efficiency, and robust performance, making it a popular choice among audio engineers and sound technicians.

One of the standout features of the MA-3600VZ is its power output. Delivering 1800 watts per channel at 2 ohms, 1200 watts per channel at 4 ohms, and 900 watts per channel at 8 ohms, it provides ample power to drive large speaker systems with ease. This level of output makes the MA-3600VZ suitable for a wide range of applications, from powering subwoofers in a nightclub to providing full-range sound in concert settings.

Another significant feature of the MA-3600VZ is its lightweight, Class-I technology. This amplifier utilizes a patented design that enhances efficiency while maintaining high audio fidelity. The result is a powerful amplifier that is both lightweight and compact, allowing for easier transport and installation.

The MA-3600VZ also incorporates advanced protection circuitry, ensuring that the amplifier and connected speakers are safeguarded against overloads, overheating, and short circuits. This built-in protection helps to extend the life of the amplifier and ensures reliability during critical live sound applications.

Crown's DriveCore technology further enhances the performance of the MA-3600VZ. This innovative technology combines power amplifier functionality with digital signal processing, resulting in reduced size and weight without compromising on output or audio quality. With a low total harmonic distortion (THD) rating, it ensures that audio reproduction is clear and accurate, critical for high-quality sound reinforcement.

The MA-3600VZ features a user-friendly interface, with an intuitive front panel that allows for easy monitoring and setup. LED indicators provide real-time feedback on power status, signal presence, and clipping, enabling quick adjustments and troubleshooting.

In conclusion, the Crown Audio MA-3600VZ is an impressive power amplifier that combines robust performance, advanced technologies, and user-friendly features. With its high power output, lightweight design, and built-in protections, it is a reliable choice for professionals seeking top-tier audio performance in a variety of settings. Whether in a concert hall, nightclub, or corporate event, the MA-3600VZ delivers the power and fidelity that audio engineers demand.
Top Page Image Contents