Subaru Robin Power Products RGX2400, RGX5500, RGX3500, RGXI 800 manual IO. Disassembly and Assembly

nChecking table for digital circuit tester.

Digital	circuit tester			Apply red @ needle of the circuit tester
			Brown	Brown	Orange	Brown/White
		Brown		No continuity	1 No continuity	Continuity
Apply black 0	needle	Brown	No continuity			Continuity
of the circuit	tester	drange	Continuity			Continuity
					.I
			I	I
		Brown/White	No continuity	No continuity	No continuity

Table 9-4-2

NOTE I: Because of the difference of measuring method between the analogue circuit tester and the digital circuit tester, polarity of tester needles should be reversed.

NOTE 2: “Continuity” means forward direction characteristics of the diode, and different from short circuit condition (in which a pointer of the tester goes out of its normal scale), shows resistance to some extent. When results of the checking indicates failure even in one section,replace with a new one.

NOTE 3: Simpson brand analogue testers are digital.

IO. DISASSEMBLY AND ASSEMBLY

10-I PREPARATION and PRECAUTIONS

1)Be sure to memorize the location of individual parts when disassembling the generator so that the generator can be reassembled correctly. Tag the disassembled part with the necessary information to facilitate easier and smoother reassembly.

2)For more convenience,divide the parts into several groups and store them in boxes.

3)To prevent bolts and nuts from being misplaced or installed incorrectly, place them temporarily back at their original position.

4)Handle disassembled parts with care; clean them before reassembly using a neutral cleaning fluid.

5)Use all disassembly/assembly tools properly, and use the proper tool for each specific job.

10-2 SPECIAL TOOLS for DISASSEMBLY and ASSEMBLY

n

REAR COVER PULLER

- 52 -