Dometic TEC 40D Instructions for the electrical connection, Connecting the fuel indicator

Page 18

Installation instructions 2

GB

2.4 Instructions for the electrical connection

 

The Dometic generator is a source of alternate 230V 50Hz tension, able to cope with various power needs.

Cross-section mm2

Cross-section mm2

Cross-section mm2

Cross-section mm2

230V

12V

Lenght up to 6m

Lenght > 6m

(power cables)

(battery charger)

(battery connection)

(battery connection)

 

 

 

 

4

2.5

16

25

Electrical connection to the external network

The on board electrical system must be fitted with a relay or switch (e.g. Dometic switch cod. AG113, available on request) to prevent damage to the generator when the external power supply network is connected; in this case, it is suggested that the generator be connected in such a way as to give it priority with respect to the external network.

Electric wiring must be effected in conformity with the existing laws and regulations in force in the user’s country.

For correct installation performed by the final user, use preventive technical assistance by your seller or by a skilled technician.

For the 230 V, use an approved cable with the section indicated in the table. For connection of the Dometic switch cod. AG113 refer to the instructions and diagram on the following pages.

Electrical connection of the battery charger

External control panel socket

Emergency stop switch

230V

plug

Earth wire

12 V plug for battery charger

Socket for tank float wire

The unit is set up to provide for automatic battery recharging. If this function is to be used, proceed as follows.

Use a cable finding the correct section in the chart on the right. Connect the cable to the connecting terminal and to the positive pole of the battery to be charged.

Should the battery be others than that used to start the generator, then connect the negative pole of this battery to the proper mass point of the generator (see picture on page 17).

NB:The negative pole of the battery should be grounded with the

vehicle’s frame.

Cut out switch

Connecting the fuel indicator

Only use the indicator connection if there is a fuel level probe in the tank used for the generator. Connect the proble cable (e.g. float) to the relevant terminal (see figure above).

TEC 40D

16

user’s manual

Page 17 Page 19
Image 18
Page 17 Page 19
Contents TEC 40d Español Keep this document for future reference Page FIN General informations Purpose of the manual Data plateSafety NoiseRecommandations for use Description of the generatorFuel Operation description General informations External control panel Internal control panelTechnical data Description Unit of Measure ValueTable describing the alarm messages appearing on the display Routine maintenance Checking the oil levelInstallation instructions Instructions for fixing the generatorUser’s manual Instructions for installing the exhaust system Instructions for the installation of the tank Instructions for the electrical connection Electrical connection of the battery chargerConnecting the fuel indicator Electrical connection to the external networkBattery connection External control panel connectionFaults, causes and solutions Out by the user Operations to be carriedMaintenance chart Maintenance work required Check list and time intervalsExtraordinary maintenance Changing the oilAir filter maintenance OperationsWiring Diagram TEC 40D AG113 Switching Accessory available on demand LoadPage Page Dometic

TEC 40D specifications

The Dometic TEC 40D is an advanced and versatile refrigerant that has gained popularity for its efficient cooling capabilities and user-friendly features. Designed primarily for the recreational vehicle (RV) and marine markets, this refrigerator combines innovative technology with practical design to cater to the needs of outdoor enthusiasts.

One of the standout features of the Dometic TEC 40D is its dual-power operation. It can be powered by either 12V DC or 230V AC, giving users flexibility in different settings. Whether on a road trip or anchored at a dock, the TEC 40D can easily connect to various power sources, ensuring reliable cooling performance anytime and anywhere.

With a capacity of 40 liters, the Dometic TEC 40D provides ample storage space for food and beverages, making it ideal for extended trips. The internal layout is designed for optimal organization, featuring adjustable shelving and door compartments that accommodate taller bottles and larger containers. This means users can maximize their storage options without compromising on accessibility.

One of the key technologies incorporated into the Dometic TEC 40D is its efficient compressor system. This advanced cooling technology delivers rapid cooling while consuming less power, ensuring that food stays fresh without draining the vehicle's battery. Additionally, the refrigerator operates quietly, allowing for a peaceful environment whether in a vehicle or on a boat.

Another notable characteristic is the robust construction of the TEC 40D. Built with high-quality materials, it is designed to withstand the rigors of outdoor use, including temperature fluctuations and vibration. Furthermore, the unit features an integrated locking mechanism that secures the door during travel, adding an extra layer of convenience and safety.

User-friendliness is another central theme in the design of the Dometic TEC 40D. The intuitive control panel allows users to easily adjust temperature settings, and the refrigerator is equipped with LED lighting that illuminates the interior for easy access even in low-light conditions.

In summary, the Dometic TEC 40D stands out as a top choice for those seeking a reliable and efficient refrigerator for their outdoor adventures. With its dual power options, efficient compressor technology, spacious interior, and durable construction, it embodies the perfect combination of functionality and convenience, ensuring that users can enjoy their journeys with peace of mind regarding their food storage needs.
Top Page Image Contents