Powermate PM0545010 Portability KIT Installation, Cord SET, Wheel Installation, Foot Installation

Page 3

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: 7/16”, 1/2”, 9/16", and 5/8” sockets and ratchets, block(s) of wood (minimum of 6” tall).

Refer to the parts list on page 9.

WHEEL INSTALLATION

1.Block up end of generator opposite the fuel tank cap to install wheel kit.

2.Slide the axle (item 35) through the wheel brackets on the carrier, then through a wheel (item 31), with the offset side of the wheel hub against the wheel bracket.

3.Secure the wheel to the axle with the axle cap (item 16), tapping the cap onto the axle with a hammer.

4.Repeat above instructions for the remaining wheel.

FOOT INSTALLATION

1.Blocking up the engine side of the generator, place the foot bracket (item 27) under the carrier channel. Thread a 5/16-18 x 4” bolt (item 29) with a rubber foot (item 32) through the mounting holes and thread a 5/16 flange nut (item 15) to the bolt to secure the foot bracket to the carrier.

Caution: Do not over tighten so that the rubber foot material collapses.

HANDLE INSTALLATION

1.Place handle (item 28) over carrier tubing on same end as feet, centering handle on the carrier.

2.Slide 7/16 x 2” bolt (item 30) through handle as shown in diagram and secure with 7/16” nyloc nut (item 33). Tighten until handle is securely clamped to the carrier tubing.

3.Apply aerosol hairspray or similar adhesive to the handle (item 28), and then slide the handle grip (item 44) onto the handle. The aerosol hairspray will allow for easier assembly and will adhere the grip to the handle.

NOTE: When using a generator cover with this portability kit, the handle must be moved to the downward position.

Your generator is supplied with a 25 foot 12 GA SJTW 4-conductor 105ºC power cord set. This cord is equipped with

CORD SET

an L14-20P twistlock Plug, on one end, which will plug directly into the mating twistlock receptacle on the control panel of your generator. The opposite end comes equipped with a special 4 circuit connector comprised of four 5-20R receptacles. These may be used to power individual loads. Make sure the loads do not exceed the 20 amp rating of the Power Cord Set. Circuit breaker protection is provided for on the control panel of your generator.

You will notice that the 4-circuit connector is color coded with red and blue dots. When several loads are powered at the same time, it is best to keep equal loads supplied to each separately colored half, if possible. The red half and the blue half of the connector are each capable of sustaining 20 amps of current provided your generator is capable of supplying 4800 watts of power. Check nameplate ratings for total wattage capability of the generator.

 

 

 

 

English

 

3

 

 

 

 

Image 3
Contents PM0545010 Limited Warranty Major Generator FeaturesControl Panel Handle Installation Portability KIT InstallationWheel Installation Foot InstallationTableau DE Commande Caractéristiques Principales DU Groupe ElectrogeneGarantie Limitée Reportez-vous à la liste des pièces des Linstallation DE KIT DE Transport Ensemble DE CordonsInstallation DES Roues Installation DU PiedReceptáculo dúplex de 120 voltios, 20 amperes Panel DE ControlCaracteristicas Principales DEL Generador Garantia LimitadaInstalacion DEL Juego DE Transport Juego DE Cordón Instalación DE LAS RuedasInstalación DE LA Manija Parts Drawing / Schema DES Pièces / Diagrama DE Piezas Part Description Descripción QTY Parts List / Liste DES Pièces / Lista DE PiezasPage Page Airport Road Box Kearney, NE Fax

PM0545010 specifications

The Powermate PM0545010 is a versatile and reliable generator designed for both residential and commercial use. This portable generator is favored for its exceptional performance, durability, and user-friendly features. It is engineered to deliver reliable power in various situations, from providing backup during power outages to serving as a vital power source for outdoor events and job sites.

One of the standout features of the PM0545010 is its powerful engine. This generator is equipped with a robust 5,500-watt peak and 4,500-watt running capacity, making it capable of handling essential appliances such as refrigerators, water pumps, and lights with ease. The generator employs a 7 HP, 4-stroke engine that is fuel-efficient and designed for longevity, offering extended run times on a single tank of fuel.

In terms of design, the Powermate PM0545010 boasts a sturdy and portable structure. It features a tubular steel frame that not only adds durability but also provides a protection barrier for vital components. The generator is equipped with heavy-duty wheels and a foldable handle, making it easy to transport from one location to another.

Additionally, the PM0545010 utilizes advanced technologies to ensure efficient operation. The generator features an integrated low-oil shutdown system that automatically stops the engine when oil levels are critically low, preventing potential damage and prolonging the life of the machine. The generator also includes a voltage regulator that offers stable power output by regulating voltage fluctuations, ensuring that sensitive electronics and appliances remain protected.

The PM0545010 is designed with ease of use in mind. It features multiple outlets, including 120V household outlets and a 120/240V twist-lock outlet, allowing users to connect various devices simultaneously. The easy-to-read control panel is intuitively laid out, providing quick access to important information such as power output and fuel levels.

In summary, the Powermate PM0545010 stands out as a reliable solution for those in need of portable power. With its powerful performance, durable construction, and user-friendly features, it is an ideal choice for homeowners, contractors, and outdoor enthusiasts alike. Whether for emergency backup power or recreational activities, the PM0545010 delivers the efficiency and reliability users seek in a portable generator.