Installation Instructions

TOOLS REQUIRED: 7/16” wrench, 3/4" socket and ratchet.

Refer to the parts list and drawing on pages 8 and 9.

WHEEL INSTALLATION

1.Slide 1/2” x 4.50” bolt (item 41) through the wheel (item 33),then through the wheel bracket, with the offset side of the wheel hub against the wheel bracket.

2.Thread 1/2” nyloc nut (item 42) onto the bolt and tighten.

3.Repeat above instructions for the remaining wheel.

FOOT INSTALLATION

1.Assemble the foot (item 44) to the carrier channel using a 1/4” x 2.00” bolt (item 43). Thread a 1/4” washer

(item 17) and a 1/4” nyloc nut (item 15) onto the bolt to secure the assembly.

Caution: Do not over tighten so that the foot material collapses.

2.Repeat above instructions for the remaining foot.

HANDLE INSTALLATION

1.Slide the reduced ends of the handle (item 18) into the upright tubes of the base as shown in the diagram.

2.Install the 1/4” x 2.00” bolts (item 43) through the tubes from the outside.

3.Thread the 1/4” nyloc nuts (item 15) onto the bolts and tighten.

NOTE: Do not over tighten.

IDLE CONTROL OPERATION

The Idle Control circuit is designed to extend engine life and improve fuel usage by slowing the engine down to approximately 2000 RPM in a “No Load” condition. The noise is also greatly reduced during this condition.

When power is required from the generator an electronic control module automatically senses current flow in the electrical outlet and allows the engine to return to full speed or standard operating condition. Likewise, when the load is removed, the generator will automatically return to the idle condition after a 4-5 second delay.

A convenient switch is mounted in the control panel for easy access and will disable the Idle Control circuitry when in the off position.

IDLE CONTROL TROUBLE SHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
Unit will not idle	Control panel switch not on	Turn to idle on position
	Load plugged into receptacle	Unplug load
	Poor connection or faulty cord	Check & repair
	Bad I.C. module; Bad electro-magnet	Replace
	or solenoids; Bad stator
		Consult dealer
Unit idles even with load plugged in	Load not heavy enough	Turn idle switch to off position
		Increase load
	Bad I.C. module	Replace
		Consult dealer
Unit tries to idle but won’t stay latched	Electro-magnet or solenoid position	Reset magnet or solenoid position for
	incorrect	2000 RPM idle speed
		Consult dealer
	Flapper bracket loose or bent	Tighten or straighten
		Replace flapper. Readjust to 2000 RPM
	Engine not running smoothly	Adjust carburetor
		Consult dealer

English

PM0463300 specifications

The Powermate PM0463300 is a robust and versatile portable generator designed to provide reliable backup power for both residential and industrial applications. Known for its durability and performance, this generator is perfect for those who require a dependable source of energy during outages or while working at remote job sites.

One of the main features of the Powermate PM0463300 is its powerful 4,600-watt starting capacity, allowing it to handle a range of appliances and tools. With a running wattage of 3,600 watts, it can effortlessly power essential devices like refrigerators, lights, and even small air conditioning units, making it a great choice for emergency situations. The generator is equipped with a robust 224cc OHV engine, which is designed for fuel efficiency and longevity. This engine type increases efficiency and reduces emissions, making it an environmentally friendly option among portable generators.

The PM0463300 is built with a heavy-duty steel frame, ensuring durability and protection against wear and tear. Its wheels and folding handles make it easy to transport, whether you’re moving it around your property or loading it into a vehicle for a camping trip. The generator also features an easy-to-read fuel gauge, allowing users to monitor fuel levels at a glance.

Another significant technology incorporated into the Powermate PM0463300 is its automatic low oil shutdown feature. This technology helps protect the engine from damage by automatically shutting off the generator when oil levels are too low. Furthermore, the generator includes multiple outlets, including both household and 30-amp RV outlets, providing versatility in powering various devices.

Additionally, the Powermate PM0463300 is designed with a user-friendly recoil start system, making it easy to operate for users of all experience levels. Its noise level is kept within acceptable limits, making it suitable for use in residential areas, while still providing adequate power.

In summary, the Powermate PM0463300 stands out due to its blend of power, portability, and practicality. With its strong engine, efficient fuel consumption, and safety features, it is an ideal choice for anyone in need of a reliable portable generator, whether for home backup power or outdoor adventures.