Warranted Parts | Powermate PMC497000 guide

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and Powermate Corporation (herein "Powermate") are pleased to explain the evaporative emission control system (EECS) warranty on your 2006 generator. In California, new generators must be designed, built and equipped to meet the State's stringent anti-smog standards. Powermate must warrant the EECS on your generator for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your generator.

Your EECS includes parts such as: fuel hoses.

MANUFACTURER'S WARRANTY COVERAGE:

This evaporative emission control system is warranted for two years. The warranty period begins on the date the generator is delivered to an ultimate purchaser.

Powermate warrants to the ultimate purchaser and any subsequent owner that the generator is (i) designed, built and equipped so as to conform with all applicable regulations; and (ii) free from defects in materials and workmanship that cause the failure of a warranted part to be identical in all material respects to that part as described in Powermate's application for certification.

If any evaporative emission-related part on your generator is defective, the part will be repaired or replaced by Powermate.

OWNER'S WARRANTY RESPONSIBILITIES:

As the generator owner, you are responsible for performance of the required maintenance listed in your owner's manual. Powermate recommends that you retain all receipts covering maintenance on your generator, but Powermate cannot deny warranty solely for the lack of receipts. You should, however, be aware that Powermate may deny you warranty coverage if your generator or a part has failed due to abuse, neglect or improper maintenance or unapproved modifications.

You are responsible for presenting your generator to an authorized Powermate warranty service center as soon as the problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If you have a question regarding your warranty coverage, you should call Powermate Product Service at 1-800-445-1805.

DETAILS OF YOUR WARRANTY

Subject to certain conditions and exclusions as stated below, the warranty on emission-related parts is as follows:

(1)Any warranted part that is not scheduled for replacement as required maintenance in the written instructions supplied, is warranted for the period stated above. If the part fails during the period of warranty coverage, the part will be repaired or replaced by Powermate according to Subsection (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period.

(2)Any warranted part that is scheduled only for regular inspection in the written instructions supplied, is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining warranty period.

(3)Any warranted part that is scheduled for replacement as required maintenance in the written instructions supplied, is warranted for the period of time before the first scheduled replacement date for that part. If the part fails before the first scheduled replacement

date, the part will be repaired or replaced by Powermate according to Subsection (4) below. Any such part repaired or replaced under warranty will be warranted for the remainder of the period prior to the first scheduled replacement date for the part.

(4)Repair or replacement of any warranted part under the warranty provisions herein must be performed at an authorized Powermate warranty service center at no charge to the owner.

(5)The generator owner will not be charged for diagnostic labor that is directly associated with diagnosis of a defective, emission-related warranted part, provided that such diagnostic work is performed at an authorized Powermate warranty service center.

(6)Powermate is liable for damages to other engine or generator components proximately caused by a failure under warranty of any warranted part.

(7)Throughout the generator warranty period stated above, Powermate will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

(8)Any replacement part may be used in the performance of any warranty maintenance or repairs and must be provided without charge to the owner. Such use will not reduce the warranty obligations of Powermate.

(9)Add-on or modified parts that are not exempted by the Air Resources Board may not be used. The use of any non-exempted add-on or modified parts by the ultimate purchaser will be grounds for disallowing a warranty claims. Powermate will not be liable to war rant failures or warranted parts caused by the use of a non-exempted add-on or modified part.

(10)The repair or replacement of any warranted part otherwise eligible for warranty coverage may be excluded from such warranty coverage if the generator has been abused, neglected or improperly maintained, and such abuse, neglect or improper maintenance was the direct cause of the need for repair or replacement of the part.

WARRANTED PARTS:

The following emission warranty parts list is covered:

Fuel Hose.


4		English

PMC497000 specifications

The Powermate PMC497000 is a powerful generator designed for a variety of applications, providing a reliable source of backup power during outages or supplying energy for outdoor events and construction projects. This generator is well-regarded for its robust build and ease of use, making it a popular choice among professionals and homeowners alike.

One of the standout features of the PMC497000 is its substantial power output. The generator is equipped with a 497cc engine that produces a peak power of up to 7,500 watts, making it capable of running multiple appliances and power tools simultaneously. This capacity is particularly useful during emergencies where several devices, such as refrigerators, lights, and heaters may need to be powered at once.

The PMC497000 also boasts a dual fuel capability, allowing it to run on either gasoline or propane. This flexibility is a significant advantage, providing users the option to choose their preferred fuel type based on availability, cost, or personal preference. The ability to switch fuels effortlessly aids in extending the runtime, especially during prolonged power outages.

For convenience, the generator is designed with an easy-start recoil system, which ensures that users can start it quickly even in challenging conditions. The inclusion of an electric start feature further enhances usability, allowing users to start the generator with the push of a button.

Another essential characteristic is the generator’s built-in overload protection. This feature protects both the generator and the appliances connected to it from damage caused by overloads, ensuring a consistent and safe supply of power. Additionally, the transparent fuel gauge allows users to monitor fuel levels easily, enhancing operational efficiency.

The PMC497000 is engineered with noise-reduction technology, enabling quieter operation compared to standard generators. This is especially beneficial for residential areas or events where noise levels need to be kept to a minimum.

In terms of portability, the generator is equipped with durable wheels and a sturdy frame, allowing for easy transportation across various terrains. Its compact design ensures that it can be stored conveniently when not in use.

In summary, the Powermate PMC497000 stands out as a versatile and reliable generator, featuring impressive power output, dual fuel capability, user-friendly starting mechanisms, and built-in safety features. Its combination of power, portability, and low noise operation makes it an excellent choice for those seeking dependable backup power.