Powermate PMC496750 manual Portability KIT Installation, Wheel Installation, Foot Installation

Page 3

PORTABILITY KIT INSTALLATION

TOOLS REQUIRED: 7/16”, 1/2” and 9/16" sockets and ratchets, block(s) of wood (minimum of 6” tall).

Refer to the parts list on page 9.

WHEEL INSTALLATION

1.Block up end of generator opposite the fuel tank cap to install wheel kit.

2.Insert wheel spacer (item 39) into the center of the wheel (item 28).

3.Slide 3/8 x 4.25” bolt (item 32) and 3/8 washer (item 27) through the wheel (item 28), then through the wheel bracket on the carrier, with the offset side of the wheel hub against the wheel bracket.

4.Thread 3/8 nyloc nut (item 33) onto the bolt and tighten to securely clamp the wheel assembly to the carrier.

5.Repeat above instructions for the remaining wheel.

FOOT INSTALLATION

1.Blocking up the engine side of the generator, place the foot bracket (item 43) under the carrier channel. Thread a 5/16-18 x 4” bolt (item 42) with a rubber foot (item 29) through the mounting holes and thread a 5/16 flange nut (item 47) to the bolt to secure the foot bracket to the carrier. Caution: Do not over tighten so that the rubber foot material collapses.

HANDLE INSTALLATION

1.Place handle (item 25) and spacer (item 46) on carrier on same end as feet, as shown in the diagram.

2.Slide 5/16 x 2.25” bolt (item 26) and 5/16 washers (item 12) through handle and handle bracket as shown in diagram and secure with 5/16” nyloc nut (item 13). Tighten until handle is securely clamped to the carrier.

3.Apply aerosol hairspray or similar adhesive to the handle (item 25), and then slide the handle grip (item 40) onto the handle. The aerosol hairspray will allow for easier assembly and will adhere the grip to the handle.

4.Insert cap (item 35) into end of handle (item 25).

5.Repeat above instructions for the remaining handle.

LOCKING HANDLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1.

Attach the lanyards (item 30) to the release

1

 

 

 

 

 

2

 

pins (item 34) and carrier as shown in the

 

 

 

 

 

 

 

 

illustration.

 

 

 

 

 

 

 

2.

To lock the handle (item 25) in the extended

 

 

 

 

 

 

 

 

position, align the holes in the handle brackets

 

 

 

 

 

 

 

 

with the holes in the carrier brackets and insert

 

30

 

34

 

 

 

 

the release pins (item 34).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

English

 

3

 

 

 

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PMC496750 Limited Warranty Major Generator FeaturesControl Panel Handle Installation Portability KIT InstallationWheel Installation Foot InstallationWarranted Parts Tableau DE Commande Caractéristiques Principales DU Groupe ElectrogeneGarantie Limitée Pose DE LA Poignee Linstallation DE KIT DE TransportInstallation DES Roues Installation DU PiedCouverture DE Garantie DU Fabricant Receptáculo dúplex de 120 voltios, 20 amperes Panel DE ControlCaracteristicas Principales DEL Generador Garantia LimitadaInstalación DE LA Manija Instalacion DEL Juego DE TransportCobertura DE LA Garantía DEL Fabricante Parts Drawing / Schema DES Pièces / Diagrama DE Piezas Parts List / Liste DES Pièces / Lista DE Piezas Part Description DescripciónQTY Qty Part Description DescripciónPage Page Powermate Corporation

PMC496750 specifications

The Powermate PMC496750 is a powerful and versatile inverter generator designed to meet the needs of various applications, including recreational events, job sites, and home backup power. With a robust output capacity, this generator leverages advanced technologies to deliver reliable performance while maintaining a compact and portable design.

One of the standout features of the PMC496750 is its 7500 peak watts and 6000 running watts. This output capacity allows it to power essential appliances and tools simultaneously, making it an ideal choice for outdoor enthusiasts and professionals alike. The inverter technology used in this generator ensures stable and clean power, making it safe for sensitive electronics such as laptops, smartphones, and medical equipment.

The Powermate PMC496750 is powered by a fuel-efficient 223cc OHV engine that provides excellent performance while minimizing fuel consumption. Its extended runtime is a major advantage, allowing users to operate the generator for extended periods without frequent refueling. This is particularly beneficial for camping trips or during power outages when access to fuel may be limited.

In terms of mobility, the PMC496750 features a lightweight and compact design, complemented by a sturdy handle and wheels for easy transportation. Users can effortlessly move the generator to different locations, be it a tailgating event or a remote job site. The durable construction and protective frame ensure that the generator withstands the rigors of outdoor use.

Noise reduction is another key aspect of the Powermate PMC496750. With its quiet operation, this inverter generator is designed to minimize sound levels, making it suitable for use in noise-sensitive environments. This feature is particularly appreciated by campers and outdoor enthusiasts who want to enjoy nature without the distraction of loud machinery.

The user-friendly control panel is equipped with multiple outlets, including standard 120V AC outlets and USB ports, providing versatility for various devices. Additionally, the Intelli-Gauge feature allows users to monitor power output, runtime, and maintenance needs easily. Safety features such as low oil shutdown and overload protection help to ensure the longevity and reliability of the generator.

Overall, the Powermate PMC496750 combines power, efficiency, and portability, making it an excellent choice for anyone in need of a reliable generator. Its advanced technologies and thoughtful features cater to diverse user needs, making it a valuable addition to any toolkit. Whether for outdoor adventures or emergency preparedness, this generator offers convenience and peace of mind.
Top Page Image Contents