Generac 7500 Remove Generator, From Carton, Installing Tray and Battery, Carton Contents

Page 5

GeneracPortableProducts7500EXLExtendedLifeGenerator

Yourgeneratorrequiressomeassemblyandis ready foruseafterit hasbeenproperlyservicedwiththe recommendedoilandfuel.

If you have any problems with the assembly of

your generator, please call the generator helpline at 1-800-270-1408.

IMPORTANT: Any attempt to run the unit before it has been serviced with the recommended oil will result in

an engine failure.

REMOVE GENERATOR

FROM CARTON

INSTALLING TRAY AND BATTERY

You must purchase and install a 12 Volt DC battery (Series U1-109). The battery should be serviced with electrolyte fluid and fully charged prior to installation. Install the battery as follows:

•Find the battery tray and fasteners shipped loose in

the carton. The battery bracket, two 7" J-bolts, two lock washers and two hex nuts are included.

•Remove the four battery tray screws from base.

•Position the battery tray and install (Figure 2).

•

Set the carton on a rigid flat surface with "This Side

I

 

Up" arrows pointing upward.

 

• Carefully open the top flaps of the shipping carton.

 

 

Review "Cold Weather Operation" on page 9.

 

• Cut down corners at one end of carton from top to

 

 

bottom and lay that side of carton down flat.

 

• Remove all packing material, carton fillers, etc.

J

 

 

•

Remove the generator from the shipping carton.

J

CARTON CONTENTS

Check alt contents If any parts are missing or damaged, call the generator helpline at

1-800-270-1408.

•The generator

Electric start battery cables

Generator and engine owner's manuals Locking 20 Amp and 30 Amp plugs Battery charge cables

Battery tray mounting bracket/hardware Spare spark plug and air filter element Spark plug wrench

•Set battery onto tray and attach bracket, J-bolts, lock washers, flat washers, and hex nuts (Figure 3). Tighten hardware with 3/8" wrench.

/

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 7500 L Equipment Description Safety RulesNever operate generator Grounding GeneratorKnow Your Generator Carton Contents Installing Tray and BatteryRemove Generator From CartonAdd Engine Oil Before Starting the EngineAdd Fuel To add oil to the engineStarting the Engine Operating GeneratorApplying Electrical Loads Stopping the EngineOperating Automatic Idle Control Battery SafetyEngine To recharge 12 Volt batteries, proceed as followsCord SETS/RECEPTACLES Cold Weather OperationVolt AC, 30 Amp Locking Receptacle This generator is equipped with the followingHot Ground Volt AC, 50 Amp Receptacle120/240 Volt AC, 30 Amp Locking Receptacle Impact Wrench Dont Overload GeneratorStorage General Maintenance RecommendationsSERVICE/ADJUSTMENTS Specifications Device is bad TroubleshootingPoor connection or defective Cord set Schematic Diagram Wiring Diagram Main Unit Exploded View Parts Not Illustrated Main Unit Parts ListItem Qty. Description 64526 Control Panel Exploded View and Parts ListPa # Qty Description GeneracPortableProducts7500EXLExtendedLifeGenerator Consumer Limited Warranty

7500 specifications

Generac 7500 is a powerful portable generator designed to provide dependable backup power for both residential and commercial needs. One of the most striking features of the Generac 7500 is its impressive output capability, delivering 7500 starting watts and 6000 running watts. This makes it suitable for powering essential appliances, tools, and equipment during a power outage or on job sites.

One of the key technologies integrated into the Generac 7500 is its OHV engine, which is designed for optimal performance and durability. This 410cc engine offers a longer lifespan and efficient fuel consumption, ensuring users can run their generator for extended periods without frequent refueling. The economy mode feature also enhances fuel efficiency by automatically adjusting the engine speed based on the load being powered, reducing fuel consumption and noise levels.

Another notable characteristic of the Generac 7500 is its heavy-duty construction. The generator is built with a rugged tubular steel framework, making it resilient against harsh outdoor conditions and ensuring longevity. Additionally, the generator is equipped with flat-free tires and a fold-down handle for easy mobility, making it ideal for transport to various locations.

The control panel of the Generac 7500 is user-friendly, featuring easy-to-read Wattage and hour meters that provide essential operational data at a glance. The generator includes multiple 120V and 240V outlets, allowing users to power a variety of devices simultaneously. The GFCI-equipped outlets provide added safety, protecting against electrical shock and ensuring compliance with safety standards.

Safety is a priority in the design of the Generac 7500. It comes with an integrated low-oil shutdown feature, which automatically turns off the engine if the oil level drops too low, preventing potential engine damage. The generator also includes an advanced circuit breaker system that protects the equipment and user from overload conditions.

Overall, the Generac 7500 stands out for its versatility, reliability, and robust features. Whether for use during power outages, outdoor events, or on job sites, this generator provides a dependable power solution, ensuring users remain connected and productive. With the combination of cutting-edge technology, solid construction, and user-friendly features, the Generac 7500 is an excellent choice for anyone in need of portable power.
Top Page Image Contents