Crown Audio 21100 user manual P i c a l a p p l i c a t i o n s, Two channel stereo operation

7 . 0 T y p i c a l a p p l i c a t i o n s

a. Two channel (stereo) operation

In this example, each channel of the PULSE 2x1100 is being used independently. For this application, ensure that the rear panel BRIDGE switches are in the NORMAL position. More than one speaker may be used on each channel as long as the total impedance is not less than 2 ohms. See section d for more information about how to calculate impedance.

Stereo

L1

R 2

1 2

for example - both speakers up to

1100W 4 ohms

b. Two amplifiers used in bridge mode

Here one amplifier is being used per channel. As the amplifiers are being operated in bridge mode, each is capable of delivering well over 3000W into 4 ohms or 2200W into 8 ohms. More than one speaker may be used on each amplifier as long as the total impedance is not less that 4 ohms. See section d for information about how to calculate impedance.

L1

R

1

Bridge

1

Bridge

1

for example - both speakers up to

2200W 8 ohms

12