Subaru Robin Power Products EH65 manual Operation, PRE-START Checks, Starting

Page 11

Operation

!WARNING EXHAUST GAS IS DEADLY!

Exhaust gases contain carbon monoxide, an odorless and color- less gas. Carbon monoxide is poisonous and can cause uncon- sciousness and death. Symptoms of carbon monoxide poisoning

include:

 

 

 

•

Dizziness

•

Throbbing in Temples

•

Nausea

•

Muscular Twitching

•

Headache

•

Vomiting

•Weakness and Sleepiness

•Inability to Think Coherently

any indications of fuel leakage. Do not operate engine until all leaks are repaired.

4.Check and tighten any loose bolts or nuts.

5.Check the oil and refill, if necessary. Do not overfill.

!CAUTION Starting the engine without oil will cause severe engine damage.

Always keep the engine oil level between the Full and Add marks on the dipstick.

6.Wear snug fitting clothes when operating the engine. Loose articles of clothing could get caught in the engine or drive train.

IF YOU OR ANYONE ELSE EXPERIENCE ANY OF THESE SYMP- TOMS, GET INTO THE FRESH AIR IMMEDIATELY. If symptoms persist, seek medical attention. Shut down the engine and do not operate it until it has been inspected and repaired.

Make certain the exhaust system is properly installed. Inspect it every time the engine is started and after every eight hours of continuous operation.

! WARNING

Moving parts can cause severe personal injury or death. Hot exhaust parts can cause severe burns. Stay clear of hot or moving parts. Make sure all protective shields and guards are secure in place before starting the equipment.

PRE-START CHECKS

Before the first start of the day and after every eight hours of operation perform the maintenance procedures in DAILY

(8 HOUR) MAINTENANCE in the Maintenance Section.

Keep a log of maintenance and the running hours. Perform any main- tenance that may be due. If the equipment has been in storage, return the engine to service as instructed under

RETURNING THE ENGINE TO SERVICE in this section.

1.Inspect exhaust system for loose joints, rusty, worn or damaged areas. Do not operate engine until all leaks are repaired.

2.Check the fuel level and refill if necessary. Open the fuel shut-off valve (if equipped).

3.Make sure fuel hoses and connections are tight. Check for

STARTING

1.Move the choke lever to the full-choke position. On equipment with a solenoid operated choke, push the switch to its choke position. In warm weather, however, or when the engine is warm, try starting without the choke or in the half-way position.

2.Turn the ignition switch to START and hold it there until the engine starts. Do not crank for more than 5 seconds at a time.

If the engine fails to start, set the switch to RUN and wait 10 seconds before the next attempt. See Troubleshooting if the engine does not start after several tries. Never turn the switch to START while the engine is running.

21

22

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Page Warranty Periods General Safety PrecautionsFuel Systems Keep the Unit and Surrounding Area CleanBatteries Protect Against Moving PartsModel Identification IntroductionAbout this Manual Description FeaturesFuel Tank InstallationLocating FuelStarting Batteries Engine OILRecommendations Filling and Change IntervalWiring Battery CablesFlex Coupling Belt DriveStarting OperationPRE-START Checks Operating in Dusty Conditions HOT and Cold Weather PrecautionsStopping Engine BREAK-INReturning the Engine to Service OUT-OF-SERVICE ProtectionDaily 8 Hour Maintenance Periodic MaintenanceChanging OIL and Filter Foam Filter AIR Cleaner MaintenanceAir Cleaner Element Replacement Outer CoverChecking Batteries Spark Plug Maintenance and ReplacementCarburetor Adjustments Troubleshooting Speed Control AdjustmentsEmission Control Information Important Information for California Engine UsersPage MANUFACTURER’S Warranty Coverage Exhaust Emissions Spark Arrestor Screen How to remove the spark arrestorHigh Altitude Engine Operation Spark Arrestor OptionalIndustrial Products Division Finding the Robin Service Dealer to Meet Your NeedsRobin Distribution Method

EH65 specifications

The Subaru Robin Power Products EH65 is a lightweight and versatile engine designed for a variety of applications, making it a preferred choice among professionals and DIY enthusiasts alike. Known for its reliability and efficiency, the EH65 is particularly suited for equipment like generators, pumps, pressure washers, and various handheld tools.

One of the main features of the EH65 is its air-cooled four-stroke engine that delivers robust power output while maintaining fuel efficiency. The engine typically produces around 6.5 horsepower, making it ideal for both light- and medium-duty applications. This engine is designed with a displacement of approximately 196cc, providing ample torque for demanding tasks. The design ensures smooth operation and minimal vibration, contributing to the overall ease of use.

In terms of technology, the EH65 utilizes Subaru's advanced overhead camshaft (OHC) design, which allows for improved airflow and combustion efficiency. This technology not only enhances power delivery but also reduces emissions, making the engine more environmentally friendly. The dual-ball bearing support system ensures longevity and reliability, as it minimizes wear and tear during operation.

Another standout characteristic of the EH65 is its simplicity of maintenance. The engine features an easy-access design, allowing users to perform routine checks and oil changes with minimal effort. This accessibility is a significant advantage for users who rely on consistent performance and uptime for their projects.

Moreover, the EH65 is designed with a lightweight aesthetic, boasting a compact size that makes it easy to transport and integrate into various equipment setups. Its low profile also allows for an easy fit in equipment where space is a constraint.

Durability is another key attribute of the Subaru Robin EH65. Built with high-quality materials, the engine can withstand challenging outdoor conditions, ensuring reliable performance day in and day out. Its robust construction signifies that it can handle the rigors of commercial use while also being suitable for residential applications.

In summary, the Subaru Robin Power Products EH65 stands out due to its efficient performance, lightweight design, and easy maintenance. With its advanced technology and durable construction, the EH65 is an excellent choice for users seeking a reliable engine that meets a wide array of power needs. Whether you are operating a generator, pumping water, or using pressure washing equipment, the EH65 delivers the quality and performance that Subaru Robin Power Products is known for.
Top Page Image Contents