Black Box BLACK BOX Pattern GeneratorVGA, PG-VGA manual P01 640x480 @60, Operation

Chapter 4: Operation

4. Operation

4.1 Starting Status (Power Switch On Mode)

P01 640x480 @60

H/V MENU

Figure 4-1. Starting status screen.

1.To start the pattern generator, press the power on/off key for 2-3 seconds. It will sound a long beep. The part number and the firmware version will display.

2.Press a function key (found below the LCD display). The PG-VGA will sound a short beep confirming your selection.

3.The factory-preset starting value is P01 640x480 @60, where:

P01=Pattern 01 640x480=Resolution 640x480 @60=Refresh rate 60 Hz

4.2 Operating Guide

4.2.1 Menu Operation

P01 640x480 @60

H/V MENU

Figure 4-2. Menu.

To start operation, press the function key (located below “menu” on the LCD display) to act ivate the menu.

724-746-5500 blackbox.com Page 9