Coleman PMC545008 manual Portability KIT Installation, Cord SET

Page 3

PORTABILITY KIT INSTALLATION

 

CORD SET

TOOLS REQUIRED: 7/16”, 1/2” and 9/16" sockets and ratchets, block(s) of wood (minimum of 6” tall).

Refer to the parts list and drawing on pages 8 and 9.

WHEEL INSTALLATION

1.Block up end of generator opposite the fuel tank cap to install wheel kit.

2.Insert wheel spacer (item 43) into the center of the wheel

(item 35).

3.Slide 3/8 x 4.25” bolt (item 41) and 3/8 washer (item 38) through the wheel (item 35), then through the wheel bracket on the carrier, with the offset side of the wheel hub against the wheel bracket.

4.Thread 3/8 nyloc nut (item 42) onto the bolt and tighten to securely clamp the wheel assembly to the carrier.

5.Repeat above instructions for the remaining wheel.

FOOT INSTALLATION

1.Assemble the rubber feet (item 37) to the foot bracket (item 50) using a 1/4-20 x 1.5” bolt (item 48). Thread a 1/4 washer (item 49) and a 1/4 nyloc nut (item 13) to the bolt to secure the assembly. Caution: Do not over tighten so that the foot material collapses.

2.Blocking up the alternator side of the generator, place the foot bracket under the carrier channel. Thread a 5/16-18 x 1” bolt (item 36) with a 5/16 washer (item 40) through the mounting holes and thread a 5/16 washer (item 40) and a 5/16 nyloc nut (item 15) to the bolt to secure the foot bracket to the carrier.

LOCKING HANDLE

1.Attach the lanyard (item 39) to the release pin (item 44) and carrier as shown in the illustration.

2.To lock the handle (item 31) in the extended position, align the holes in the handle bracket with the holes in the carrier bracket and insert the release pin (item 44).

3.Insert caps (item 45) into ends of handle (item 31)

Your generator is supplied with a 25 foot 12 GA SJTW 4-conductor 105ºC power cord set. This cord is equipped with an L14-20P twistlock Plug, on one end, which will plug directly into the mating twistlock receptacle on the control panel of your generator. The opposite end comes equipped with a special 4 circuit connector comprised of four 5-20R receptacles. These may be used to power individual loads. Make sure the loads do not exceed the 20 amp rating of the Power Cord Set. Circuit breaker protection is provided for on the control panel of your generator.

You will notice that the 4-circuit connector is color coded with red and blue dots. When several loads are powered at the same time, it is best to keep equal loads supplied to each separately colored half, if possible. The red half and the blue half of the connector are each capable of sustaining 20 amps of current provided your generator is capable of supplying 4800 watts of power. Check nameplate ratings for total wattage capability of the generator.

1

2

 

 

 

English

3

 

 

 

Page 2 Page 4
Image 3
Page 2 Page 4
Contents PMC545008 Control Panel Major Generator FeaturesCord SET Portability KIT InstallationWarranted Parts Tableau DE Commande Caractéristiques Principales DU Groupe ElectrogeneGarantie Limitée Ensemble DE Cordons Linstallation DE KIT DE TransportCouverture DE Garantie DU Fabricant Garantia Limitada Caracteristicas Principales DEL GeneradorJuego DE Cordón Instalacion DEL Juego DE TransportCobertura DE LA Garantía DEL Fabricante PMC545008 Parts Drawing / Schema DES Pièces / Diagrama DE PiezasPart Description Descripción QTY Parts List / Liste DES Pièces / Lista DE PiezasPage Page Page Airport Road Box Kearney, NE Fax

PMC545008 specifications

The Coleman PMC545008 is a versatile and user-friendly portable camping stove that is designed for outdoor enthusiasts who value convenience and performance. This stove is perfect for camping trips, picnics, tailgating events, and outdoor cooking in general.

One of the main features of the Coleman PMC545008 is its dual-burner design, which provides two independent cooking surfaces. Each burner delivers up to 7,500 BTUs of heat, allowing you to cook multiple dishes at the same time. The burners also have individual control knobs, enabling precise temperature adjustments for various cooking needs, from high heat for boiling water to low heat for simmering sauces.

The Coleman PMC545008 employs a sturdy and durable construction, with a power-coated steel frame designed to withstand the rigors of outdoor use. Its large cooking surface is designed to accommodate various pot sizes and cooking equipment, while offering ample space for meal preparation. The stove is also equipped with a windblock system that helps shield the flames from wind, ensuring efficient cooking even in breezy conditions.

In terms of fuel, the Coleman PMC545008 uses propane, which is widely available and easy to use. The stove features an integrated ignition system, making ignition quick and hassle-free whenever you’re ready to cook. The removable drip tray simplifies the cleanup process, as it catches spills and debris during cooking.

The compact and lightweight design of the Coleman PMC545008 makes it easy to transport and set up. It folds conveniently for storage and can be easily stowed in the trunk of your car or at the campsite. This portability makes it an excellent choice for campers and hikers looking for a reliable cooking solution.

Safety features are also a priority with this stove. It comes equipped with safety lock controls and is designed with stability in mind, ensuring it remains steady during use on various terrains.

Overall, the Coleman PMC545008 stands out as a practical and efficient option for outdoor cooking. With its robust features, user-friendly design, and reliable performance, this camping stove can enhance your outdoor cooking experience, allowing you to enjoy delicious meals in nature without compromising on comfort or convenience.
Top Page Image Contents