American Power Conversion 1000, 750VA UPS. Use only interface kits supplied or approved by APC

Page 7

1.Connect equipment to the UPS. Note: Do not connect a laser printer to the UPS. A laser printer draws significantly more power than other types of equipment and may overload the UPS.

2.Add any optional accessories to the Smart-Slot.

3.Using a power cord, plug the UPS into a two-pole, three-wire, grounded receptacle only. Avoid using extension cords.

•120/100V models: The power cord is permanently attached to the rear panel of the UPS.

4.Turn on all connected equipment. To use the UPS as a master ON/OFF switch, be sure all con- nected equipment is switched ON. The equipment will not be powered until the UPS is turned on.

5.To power up the UPS press the button on the front panel.

•The UPS charges its battery when it is connected to utility power. The battery charges to 90% capacity during the first three hours of normal operation. Do not expect full battery run capability during this initial charge period.

•120V Models: Check the site wiring fault LED located on the rear panel. It lights up if the UPS is plugged into an improperly wired utility power outlet. Refer to Troubleshooting in this manual.

6.For additional computer system security, install PowerChutePlus® Smart-UPS monitoring soft- ware.

BASIC CONNECTORS

Serial Port

USB Port Power management software and interface kits can be used with the

 

UPS. Use only interface kits supplied or approved by APC.

Use an APC supplied cable to connect to the Serial Port. DO NOT use a standard serial interface cable since it is incompatible with the UPS connector.

Both Serial and USB Ports are provided. They cannot be used simultaneously.

5

For further information contact UPS Direct Ltd:

Tel: 08456 445 002 - Fax: 08456 445 003 - Email: info@upsdirect.com - Website: www.upsdirect.com

Page 6 Page 8
Image 7
Page 6 Page 8
Contents APC Smart-UPS Page Unpacking IntroductionPositioning the UPS Installing the Rails in the Rack Mounting the UPS in a Rack Connecting Equipment and Power to the UPS UPS. Use only interface kits supplied or approved by APC Operation On Battery Operation User Configurable Items 230V models Disconnecting the Battery for Transport Replacing the Battery ModuleStorage Troubleshooting 120V models only. Site wiring Utility Voltage Contacting APC Service230V Models Regulatory Agency Approvals and Radio Frequency WarningsDeclaration of Conformity Limited Warranty
Related manuals
Manual 2 pages 19.53 Kb Manual 18 pages 58.18 Kb

1000, 750VA specifications

American Power Conversion (APC) is a leading name in the field of uninterruptible power supplies (UPS), offering a range of products designed to ensure power reliability for various applications. Among its notable models are the APC 1000, 1050, 1100, and 1400 VA units. Each of these models comes packed with features and technologies aimed at protecting sensitive electronic equipment from power disruptions.

The APC 1000 VA model is designed to cater to small server rooms, workstations, and point-of-sale systems. With a capacity of 1000 VA, this model can support several devices simultaneously, providing robust battery backup and surge protection. Its Automatic Voltage Regulation (AVR) helps maintain a consistent voltage level, safeguarding connected equipment from overvoltages and undervoltages. The unit is equipped with an LCD interface that displays real-time data regarding battery status, load levels, and estimated runtime.

The APC 1050 VA is a slightly upgraded version that offers a higher power capacity suitable for more demanding applications. This unit features advanced battery management technology, enhancing battery performance and prolonging its lifespan. With an extended runtime capability, the APC 1050 is ideal for critical systems that require longer power backup in case of outages. The hot-swappable batteries allow for easy maintenance without interrupting the power supply.

Moving up the range, the APC 1100 VA model provides additional features like built-in PowerChute software, which allows users to manage UPS settings and safely shut down systems during prolonged outages. This model is renowned for its compact design and energy efficiency, making it an excellent choice for both home office setups and small business environments.

Lastly, the APC 1400 VA model offers robust performance tailored for larger systems or more extensive networks. It comes with additional outlets and improved power distribution options, ensuring that multiple high-draw devices can be supported at once. This model is particularly beneficial for IT environments where equipment uptime is paramount.

In summary, APC’s 1000, 1050, 1100, and 1400 VA UPS models are engineered with advanced technologies such as AVR, enhanced battery management, and comprehensive monitoring systems. These features help provide reliable power protection and performance, making them essential components for anyone looking to safeguard their electronic investments against power fluctuations and outages.
Top Page Image Contents