Briggs & Stratton 030213, 030212 Unintentional sparking can result in fire or electric shock

Page 4

SAFETY RULES

WARNING

Rapid retraction of starter cord (kickback) will pull hand and arm toward engine faster than you can let go.

Broken bones, fractures, bruises or sprains could result.

•When starting engine, pull cord slowly until resistance is felt and then pull rapidly to avoid kickback.

•NEVER start or stop engine with electrical devices plugged in and turned on.

WARNING

Unintentional sparking can result in fire or electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR GENERATOR

•Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHEN TESTING FOR ENGINE SPARK

•Use approved spark plug tester.

•DO NOT check for spark with spark plug removed.

WARNING

Running engines produce heat.Temperature of muffler and nearby areas can reach or exceed 65°C (150°F).

Severe burns can occur on contact.

Combustible debris, such as leaves, grass, brush, ect. can catch fire.

•DO NOT touch hot surfaces.

•Allow equipment to cool before touching.

•The generator must be at least 2m (5 ft) from structures having combustible walls and/or other combustible materials.

•Keep at least 1m (3 ft) of clearance on all sides of generator for adequate cooling, maintenance and servicing.

CAUTION

Excessively high operating speeds increase risk of injury and damage to generator.

Excessively low speeds impose a heavy load.

•DO NOT tamper with governed speed. Generator supplies correct rated frequency and voltage when running at governed speed.

•DO NOT modify generator in any way.

CAUTION

Exceeding generators wattage/amperage capacity can damage generator and/or electrical devices connected to it.

•See “Don’t Overload Generator”.

•Start generator and let engine stabilize before connecting electrical loads.

•Connect electrical loads in OFF position, then turn ON for operation.

•Turn electrical loads OFF and disconnect from generator before stopping generator.

CAUTION

Improper treatment of generator can damage it and shorten its life.

•Use generator only for intended uses.

•Operate generator only on level surfaces.

•DO NOT expose generator to excessive moisture, dust, dirt, or corrosive vapors.

•DO NOT insert any objects through cooling slots.

•If connected devices overheat, turn them off and disconnect them from generator.

•Shut off generator if:

-electrical output is lost;

-equipment sparks, smokes, or emits flames; -unit vibrates excessively.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 030212 2.5 kW 030213 2.8 kW Questions? Help is just a moment awaySafety Rules Table of ContentsEquipment Description Generator produces powerful voltage Unintentional sparking can result in fire or electric shock Know Your Generator Model Know Your Generator Model Assembly Before Starting the EngineRemove Generator From Carton Add Engine OilUsing the Generator Connecting to a Building’s Electrical SystemSystem Ground Generator LocationConnecting Electrical Loads Operating GeneratorStarting the Engine Stopping the EngineReceptacles Cold Weather OperationAC Voltmeter Model 030213 Only Circuit BreakerPower Management Dont Overload GeneratorCapacity For ExampleSpecifications General Maintenance RecommendationsEngine Maintenance Generator MaintenanceGenerator Storage StorageEngine Storage Other Storage Tips Troubleshooting Page Limited Warranty

030212, 030213 specifications

Briggs & Stratton is a well-known name in the realm of small engines, particularly for outdoor power equipment. The models 030212 and 030213 showcase the company’s commitment to quality, innovation, and performance. These engines are primarily designed for residential and commercial applications, offering reliability and efficiency for various power equipment needs.

The Briggs & Stratton 030212 and 030213 engines are distinguished by their robust construction and advanced engineering. One of the notable features is their overhead valve (OHV) design, which enhances airflow and fuel efficiency. This design not only results in lower emissions but also delivers better torque and power during operation. As a result, users can expect higher performance from these engines, making them ideal for lawn mowers, generators, pressure washers, and other outdoor equipment.

Both models come equipped with a reliable recoil start system, ensuring that starting the engine is user-friendly and straightforward. In terms of maintenance, Briggs & Stratton has integrated a simple oil check and fill system, allowing operators to easily monitor and maintain oil levels to optimize engine performance and longevity.

Another standout characteristic of these engines is their enhanced fuel efficiency. By incorporating state-of-the-art fuel management technology, the 030212 and 030213 minimize fuel consumption while maximizing output. This not only translates to cost savings for users but also contributes to environmentally friendly operation.

The engines also feature a dual-air cleaner system. This system helps ensure clean air intake, reducing dust and debris that can impact engine performance. The enhanced filtration contributes to longer engine life and decreased maintenance intervals, allowing users to focus on their tasks rather than frequent engine upkeep.

Furthermore, the engines boast a compact and lightweight design, which makes them easy to install and transport. This portability is a significant advantage for those who use them across multiple locations or in varied applications.

Overall, the Briggs & Stratton 030212 and 030213 engines exemplify the company’s dedication to innovation and performance. With their advanced features, user-friendly design, and efficiency-conscious engineering, these models serve as reliable power sources for a range of outdoor and utility applications, solidifying Briggs & Stratton's reputation in the small engine market.
Top Page Image Contents