Chicago Electric 98706 manual Basic Specifications, Unpacking, Functions

Page 8

Basic Specifications

 

Type

91+ octane premium

Fuel

unleaded gasoline

 

 

Capacity

4 Gallons

 

Type

SAE 10W-30 above 32°F

Engine

SAE 5W-30 at 32°F or below

Oil

Capacity

2/3 Quart; Low Oil Shutdown

 

Sensor

Spark Plug Gap

0.030”

Run Time @

9 Hours with full tank

50% Load

 

Engine Type

6.5 HP Four-stroke Overhead

Valve Design

 

 

Ignition

 

Recoil Start with Electronic

 

Ignition

 

 

 

 

One 20A duplex NEMA

 

 

120V~receptacle

Electrical Outlets

One 25A NEMA 120V 3 prong

 

 

twist lock receptacle

 

 

One T-Type 12V outlet

Note: Additional specifications found in the Technical Engine Specifications chart in this manual.

The emission control system for this engine is warranted for standards set by the U.S. Environmental Protection Agency and by the California Air Resources Board (also known as CARB). For warranty information, refer to the last pages of this manual.

At high altitudes, the engine’s carburetor, governor (if so equipped), and any other parts that control the fuel-air ratio will need to be adjusted by a qualified mechanic to allow efficient high-altitude use and to prevent damage to the engine and any other devices used with this product.

Functions

This unit can power items such as the following:

ITEM

RUNNING

START-UP

 

WATTS

WATTS

Belt Sander

1200

2400

Refrigerator/Freezer

700

2200

1/2 HP Sump Pump

1050

2150

1/2 HP Well Pump

1000

2100

Miter Saw

1650

3000

1-1/2 HP Capacitor Start

1400

3100

& Run Motor

 

 

Note: The above wattages are estimates. Check nameplate wattages on all loads before connecting to generator.

Unpacking

When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at 1-800-444- 3353 as soon as possible.

REMOVE THESE BOLTS AND BRACKETS BEFORE USE!

There are two metal brackets that secure the generator to the bottom of the crate. These brackets hold the generator in place during shipment to prevent damage. They must be removed before use. See the photo above.

REV 08g

Page 8

For technical questions, please call 1-800-444-3353.

SKU 98706

Image 8
Contents For technical questions or replacement parts, please call Certified in CaliforniaContents Set up precautions Save This ManualOperating precautions Carbon Monoxide Hazard Using an engine indoorsAC Applications Service precautions Feet Extension CordsSee Table a Functions Basic SpecificationsUnpacking Breaker Switch ControlsOperating Instructions Starting the EngineSKU For technical questions, please call Equipment Operation Control Panel Features Technical Specifications Maintenance ProceduresAir Filter Element Maintenance ServicingCleaning Cleaning, Maintenance, Lubrication Schedule StorageFor technical questions, please call Engine Troubleshooting Engine System Possible Cause Possible SolutionEngine not run Equipment Troubleshooting Problem Possible Causes Probable SolutionsPart Description Qty Main Assembly Diagram Parts List and Diagram a Crankcase Assembly Record Product’s Serial Number HereParts List and Diagram B Cylinder Head Assembly QTY QTY Parts List and Diagram E Air Cleaner and Muffler Assembly Parts List and Diagram F Fuel Supply System Part DescriptionParts List and Diagram G Starter and Generator Assembly Wiring Diagram Limited 1 year / 90 Day Warranty Emission Control System WarrantyOwner’s Warranty Responsibilities