Technical
Specifications
Engine Type | 4 Stroke, OHV | ||
Bore x Stroke | 68 x 54mm | ||
Compression Ratio | 8.5:1 | ||
Displacement | 196cc | ||
| Type | 91+ octane premium | |
Fuel | unleaded gasoline | ||
| |||
| Capacity | 4 Gallons | |
|
| ||
Engine Oil | Type | SAE | |
|
| below | |
| Capacity | 2/3 Quarts | |
Spark | Compatible | NGK BP61S | |
Types | Bosch W6DC | ||
Plug | Champion N11YC | ||
| |||
| Gap | 0.030” | |
Valve | Intake | 0.1mm | |
Clearance | Exhaust | 0.15mm | |
Speed |
| 3600 RPM | |
Servicing
To prevent serious injury
from accidental starting:
Turn the Power Switch of the equipment to its “OFF” position, wait for the engine to cool, and disconnect the spark plug wire(s) before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury
from equipment failure: Do not use damaged equipment. If abnormal noise, vibration, or excess smoking occurs, have the problem corrected before further use.
Maintenance Procedures
Many maintenance procedures, including those not detailed in this manual, will need to
be performed by a qualified technician for safety. If you have any doubts about your ability to safely service the equipment or engine, have a qualified technician service the equipment instead.
Note: Warranty is void if proper maintenance and servicing procedures are not followed.
Engine Oil Change
CAUTION! Oil is very hot during operation and can cause burns. Wait for engine to cool before changing oil.
1.Place a drain pan (not included) underneath the crankcase’s drain plug.
2.Remove the Drain Plug (1a) and, if possible, tilt the crankcase slightly to help drain the oil out. Recycle used oil.
3.If the Drain Plug Washer (2a) is damaged, replace with a new Washer.
4.
5.Refill the oil to the proper level following the instructions under the Starting the Engine section.
Air Filter Element Maintenance
1.Wipe off the air cleaner cover.
Page 14 | For technical questions, please call | SKU 65414 |