Storage Bnstructbons, Carburetor, Generator

Before running engine, clean muffler area to remove all combustible debris.

Clean and Replace Spark Plug

Change the spark plug every 100 hours of operation or once each year, whichever comes firsL This will help your engine to start easier and run better.

RESISTOR

Carburetor

The carburetor of your generator is pre-set at the factory. The carburetor should not be tampered with. if your gen- erator is used at an altitude in excess of 4000 feet perfor- mance may be affected. If so consult with your nearest Sears Service Center regarding high altitude set changes.

GovePnoP

Your engine governor maintains the constant operating speed of your generator. DO NOT tamper with the engine governor which is factory set for proper engine speed.

If you are going to store your generator for more than 30 days, use the following information as a guide to prepare the generator for storage.

STORAGE BNSTRUCTBONS

CAUTION: Never store generator with fuel in the tank indoors or in enclosed, poorly ventilated areas, where fumes can reach an open flame, spark or pilot light as on a furnace, water heater clothes dryer or other gas appliances.

Engine Preparation

Add fuel stabilizer to fuel tank to minimize the

formation of fuel gum deposits during storage.

Run engine at bast 10 minutes after adding stabilizer to allow it to enter the fuel system.

Next shut off engine.

Over-speeding your engine above factory high speed set- ting can be dangerous and couUd possibly cause personal injury or property damage. If you believe the engine is run- ning too fast or slow, take your generator to a Authorized Sears Service Center for repair and adjustment.

CAUTION: Low engine speeds impose a heavy load on the engine and when sufficient power is not avail- able the engine life could be shorten.

Disconnect the spark plug wire and remove the spark plug.

Add one teaspoon of oii through the spark piug hob.

Place rag over spark plug hole and pull the recoil a few times to lubricate the combustion chamber.

Replace the spark plug, but do not connect the spark plug wire.

NOTE: If a fuel stabilizer is not used, all gasoline must be drained from the tank and carburetor to prevent gum deposits from forming on these parts and causing possible malfunction of the engine.

Generator

Clean the generator as outlined on Page 14 (Generator Maintenanc@

Check that cooiing air dots and openings on generator are open and unobstructed.

15 -- ENG

919.67937 specifications

The Craftsman 919.67937 is a high-performance air compressor designed to meet the demands of both professional and DIY users. This versatile compressor is particularly appreciated for its durability, efficiency, and user-friendly features. With a robust design, it offers an impressive array of specifications and technologies that set it apart from other models in its class.

One of the standout features of the Craftsman 919.67937 is its powerful motor. Equipped with a 1.5 HP motor, this compressor generates enough power to handle a variety of tasks, from inflating tires to powering pneumatic tools. The unit operates at a maximum pressure of 135 PSI, providing ample air pressure for various applications while ensuring quick recovery times. The 6-gallon capacity tank allows for extended use without the need for frequent refilling, making it ideal for prolonged jobs.

Portability is another key characteristic of the Craftsman 919.67937. Weighing in at a manageable level and featuring a compact design, it is easy to transport from one job site to another. The integrated handle and rubber foot pads add to its stability and make it easy to move without risking tipping or damage during transport.

The compressor is also fitted with a user-friendly control panel that includes an easy-to-read pressure gauge, allowing users to monitor air pressure levels at a glance. The quick-connect couplers enable fast tool changes, saving valuable time when switching between different pneumatic applications. Additionally, this model is engineered to be quieter than many comparable compressors, making it suitable for indoor use or residential areas without causing excessive noise disturbances.

In terms of safety, the Craftsman 919.67937 includes several features designed to protect the user and enhance longevity. The thermal protection feature prevents the motor from overheating during prolonged use. The rubberized feet help minimize vibrations and maintain stable operation during use.

Overall, the Craftsman 919.67937 is a versatile and reliable air compressor that provides excellent performance for a wide range of applications. Its combination of power, portability, and user-friendly features makes it a standout choice for both professionals and hobbyists looking for a dependable air compressor. Whether tackling home improvement projects or engaging in professional tasks, the Craftsman 919.67937 rises to the occasion with ease.