Starting the Generator, Verify Gas Level

Step 2 - Verify Gas Level

Before starting this generator, verify that there is sufficient gasoline in the fuel tank. The fuel gauge, located on the top of this generator, indicates the gas level currently in the fuel tank. If necessary, add fresh unleaded gasoline with an octane rating of 87 or higher according to “Step 2 - Add Gasoline” of the “Using this Generator for the First Time” section of this manual.

Model AC-G0002 Fuel Tank Capacity (gals /L)	4 / 15
Model AC-G0002 Fuel Type	Fresh, Unleaded Gasoline Octane Rating 87 or Higher

Gasoline and gasoline fumes are highly flammable and explosive. Handling fuel can result in serious injury or burns.

•Do not fill the fuel tank near a heat, sparks or an open flame. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.

•Always allow several minutes for the engine to cool before refueling.

•Do not overfill the fuel tank. Always check for fuel spills and immediately wipe them up. Spilled fuel is a fire hazard and causes environmental damage.

IMPORTANT:

•Use only fresh UNLEADED gasoline with an octane rating of 87 or higher.

•Never use old and/or contaminated gasoline.

•Never use a mixture of oil and gasoline.

•Avoid getting dirt and/or water in the fuel tank.

•Never store generator for extended time with gasoline in the fuel tank.

Step 3 - Ground the Generator

Failure to properly ground this generator can result in electrocution.

Ground this generator by tightening the grounding nut against a grounding wire as previously illustrated in Figure 3. A generally acceptable grounding wire is a No. 12 AWG (American Wire Gauge) stranded copper wire. The other end of this grounding wire should be connected to a copper or brass grounding rod that is driven into the earth.

Grounding codes can vary by location. Contact a local electrician for information on grounding regulations for your area.

STARTING THE GENERATOR

STOP!

Before starting this generator, confirm that all the steps in the section titled, “Preparing the Generator for Use,” of this manual have been correctly completed. If unsure about how to perform any of these steps, call 1-866-460-9437, Monday - Friday, 8 AM - 4 PM Central Time for customer service.

Disconnect all electrical loads from this generator before attempting to start.

To start this generator:

1.Confirm that there are no electrical devices connected to this generator. Connected devices may increase the difficulty in starting the engine.

2.Confirm that this generator is properly grounded. (See “Ground the Generator” section of this manual.)

3.Turn the fuel valve to the “on” position as shown in Figure 4.

4.Move the choke lever to the “closed” position as shown in Figure 5.

5.Set the engine switch to the “on” position.

Model AC-G0002 3500 Surge Watts / 3000 Running Watts Portable Generator

AC-G0002 specifications

The ACDelco AC-G0002 is an advanced automotive air conditioning compressor designed to deliver optimal performance and efficiency in various vehicle applications. As a product of ACDelco, a brand known for its commitment to quality and reliability, the AC-G0002 stands out in the marketplace for its cutting-edge features and innovative technologies.

One of the main features of the ACDelco AC-G0002 is its high-quality construction, which ensures durability and longevity. Built with robust materials, this compressor is engineered to withstand the rigors of diverse driving conditions and is resistant to wear and tear, ensuring that it can provide consistent performance over time. Additionally, the AC-G0002 undergoes rigorous testing for vibration, noise, and performance, allowing it to meet or exceed industry standards for automotive components.

The AC-G0002 also utilizes advanced technologies to enhance its cooling capacity. It employs a high-efficiency scroll design that maximizes airflow while minimizing energy consumption. This innovative design not only improves the cooling performance but also contributes to better fuel efficiency, making it an environmentally friendly option for automotive air conditioning systems.

Another key characteristic of the ACDelco AC-G0002 is its compatibility with a wide range of vehicles. It is designed to fit various models, making it an ideal choice for automotive technicians and DIY enthusiasts looking for a reliable replacement compressor. The unit often comes with pre-installed components, such as the clutch and pulley, simplifying installation and reducing additional parts procurement.

Furthermore, the ACDelco AC-G0002 features an integrated thermal sensor that monitors the temperature of the refrigerant. This real-time data allows the system to optimize its performance, ensuring that the cabin remains comfortable regardless of external weather conditions. The smart technology employed in this compressor helps prevent overcooling and maintains the system’s efficiency.

In conclusion, the ACDelco AC-G0002 is more than just an air conditioning compressor; it is a testament to ACDelco’s dedication to providing high-performance automotive solutions. With its durable construction, efficient cooling technology, compatibility, and intelligent features, the AC-G0002 offers a reliable replacement option for those seeking to maintain or upgrade their vehicle’s air conditioning system. Whether in extreme heat or cold, this compressor ensures that drivers and passengers enjoy a comfortable ride.