Philips HTL6145C user manual Connect and set up, Place subwoofer, Pair up with the subwoofer

3Connect and set up

This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide.

Note

•• For identification and supply ratings, see the type plate at the back or bottom of the product.

•• Before you make or change any connections, make sure that all devices are disconnected from the power outlet.

Place subwoofer

See the quick start guide on how to place the subwoofer.

Note

•• If you place the subwoofer vertically, install the supplied foot stand to prevent instability of the subwoofer.

Place the subwoofer at least 1 meter (3 feet) away from your SoundBar, and ten centimeters away from the wall.

For best results, place your subwoofer as shown below.

Pair up with the subwoofer

The wireless subwoofer automatically pairs up with the SoundBar for wireless connection when you turn on the SoundBar and the subwoofer.

If no audio from the wireless subwoofer can be heard, manually pair up the subwoofer.

1	Turn on the SoundBar and the subwoofer.
	»»If the connection to the SoundBar is
	lost, the indicator on the subwoofer
2	blinks white slowly.
	Press the CONNECT (connect) button
	on the subwoofer to enter the pairing
	mode.
	»»The indicator on the subwoofer blinks
3	white quickly.
	On the remote control, within six seconds
	press twice then BASS + once, and then
	hold down SURROUND ON.
	»»If the pairing succeeds, the indicator on
	the subwoofer lights up white.
	»»If the pairing fails, the indicator on the
4	subwoofer blinks white slowly.
	If the pairing fails, repeat the steps above.
	EN	7