MTD 800 manual OPERATOR’S Manual

Page 1

OPERATOR’S MANUAL

Model Series

800

Snow Thrower

IMPORTANT READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

Warning This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.

MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722

PRINTED IN U.S.A.

FORM NO. 770-0888A

Image 1
Contents OPERATOR’S Manual Training Important Safe Operation PracticesPreparation OperationSafety Labels Found on Snow Thrower Maintenance and StorageCalling Customer Support Finding Your Model NumberAuger Shear Bolts SET-UP InstructionsAuger and Traction Drive Clutch Adjustment Final AdjustmentsSkid Shoe Adjustment See Figure Shift Lever Adjustment See FigureShift Lever ControlsTraction DRIVE/AUGER Clutch Lock Fuel SHUT-OFF ValveGAS and OIL FILL-UP OperationTo Start Engine Adjustments Lubrication Belt Removal and Replacement MaintenanceAugers Shave Plate and Skid ShoesEngine Frame AssemblyShoulder BoltChanging the Friction Wheel OFF-SEASON StorageSupport Bracket Shaft Trouble Possible Causes Corrective Action Trouble Shooting GuideIllustrated Parts Headlight PanelHandle Assembly Handle Assembly Auger Housing Auger Housing Engine and V-Belts Engine and V-Belts Transmission Transmission Other Warranties MANUFACTURER’S Limited Warranty for