Poulan B8527ES owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14–17 PSI.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineTo USE Fuel SHUT-OFF Valve See Fig HOW to USE Your Snow ThrowerStopping To USE Choke Control See FigUsing the CLEAN-OUT Tool See Fig To Throw Snow See FigTo Move Forward and Backward See Fig Before Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes Limited Warranty

B8527ES specifications

The Poulan B8527ES is a powerful and reliable snow blower designed specifically for tackling heavy snowfall and providing efficient snow removal for residential users. With its robust design and advanced technologies, this model is perfect for homeowners dealing with winter weather challenges.

One of the standout features of the Poulan B8527ES is its 27-inch clearing width, which allows users to quickly and efficiently clear wide paths in a single pass. This impressive width is complemented by a strong throwing distance, capable of launching snow up to 30 feet away, making it ideal for clearing driveways, sidewalks, and larger outdoor areas.

The snow blower is powered by a reliable 250cc engine, which provides enough torque and power to take on tough snow conditions, including packed and wet snow. The engine is equipped with an electric start feature, ensuring a hassle-free startup even in the coldest temperatures. With the press of a button, users can quickly get to work without the need for strenuous manual cranking.

Comfort and ease of use are also prioritized in the design of the Poulan B8527ES. It features an adjustable handle height, allowing operators to customize the height to their preference, providing a more comfortable grip. The ergonomic controls are intuitively placed, making it easy to operate the machine even while wearing gloves.

The snow blower also boasts a 6-speed transmission which includes 5 forward speeds and 1 reverse speed, allowing users to navigate through various snow depths and types with ease. Its heavy-duty auger and impeller work in tandem to break up and efficiently discharge snow, ensuring a thorough clean-up.

To enhance durability and performance, the Poulan B8527ES is constructed with high-quality materials that are designed to withstand harsh winter conditions. The steel chassis provides robustness while also being lightweight enough for maneuverability. Moreover, the steel auger and impeller are engineered to endure aggressive use, making the machine a dependable choice for years to come.

In conclusion, the Poulan B8527ES is an excellent snow blower that combines power, comfort, and technology to streamline the snow removal process. With its impressive clearing capabilities, user-friendly features, and rugged construction, it stands out as a reliable solution for homeowners facing winter snowstorms.
Top Page Image Contents