Poulan 96194000505 owner manual Safe Operation Practices for Walk-Behind Snow Throwers

Page 2

IMPORTANT

Safe Operation Practices for Walk-Behind Snow Throwers

This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping sur- faces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

Training

1.Read, understand and follow all instructions on the machine and in the manual(s) before operating this unit. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

2.Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

3.Keep the area of operation clear of all persons, par- ticularly small children.

4.Exercise caution to avoid slipping or falling, especially when operating the snow thrower in reverse.

Preparation

1.Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, and other foreign objects.

2.Disengage all clutches and shift into neutral before starting the engine (motor).

3.Do not operate the equipment without wearing adequate winter garments. Avoid loose fitting clothing that can get caught in moving parts. Wear footwear that will improve footing on slippery surfaces.

4.Handle fuel with care; it is highly flammable

(a)Use an approved fuel container.

(b)Never add fuel to a running engine or hot en- gine.

(c)Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.

(d)Never fill containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place contain- ers on the ground, away from your vehicle, before filling.

(e)When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

(f)Keep the nozzle in contact with the rim of the fuel tank or container opening at all times, until refuel- ing is complete. Do not use a nozzle lock-open device.

(g)Replace gasoline cap securely and wipe up spilled fuel.

(h)If fuel is spilled on clothing, change clothing im- mediately.

5.Use extension cords and receptacles as specified by the manufacturer for all units with electric drive motors or electric starting motors.

6.Adjust the collector housing height to clear gravel or crushed rock surface.

7.Never attempt to make any adjustments while the engine (motor) is running (except when specifically recommended by manufacturer).

8.Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the machine.

Operation

1.Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening at all times.

2.Exercise extreme caution when operating on or cross- ing gravel drives, walks, or roads. Stay alert for hidden hazards or traffic.

3.After striking a foreign object, stop the engine (motor), remove the wire from the spark plug, disconnect the cord on electric motors, thoroughly inspect the snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

4.If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

5.Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the collector/impeller

 

housing or discharge chute, and when making any

2

repairs, adjustments or inspections.

 

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Remove Snow Thrower from Carton Assembly / PRE-OPERATIONParts Packed Separately in Carton Install Traction Drive Control ROD See Figs HOW to SET UP Your Snow ThrowerInstall Speed Control ROD See Figs Tool BOX See FigCheck Tire Pressure Install Auger Control ROD See FigsInstall Discharge Chute / Chute Rotator Head See Fig Primer OperationKnow Your Snow Thrower Ignition KEYMeets A.N.S.I. Safety Requirements To USE Choke Control See Fig HOW to USE Your Snow ThrowerStopping To Control Snow Discharge See FigsTo Move Forward and Backward See Fig Using the CLEAN-OUT Tool See FigTo Throw Snow See Fig Scraper BAR See Fig To Adjust Skid Plates See FigBefore Starting the Engine Check Engine OIL Level See FigBefore Stopping Snow Throwing TipsTo Start Engine If Recoil Starter has FrozenMaintenance Cleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage Troubleshooting OtherPreparación Importante¡ESTE ALERTO! SU Seguridad Esta Comprometida FuncionamientoMontaje / PRE-OPERACIÓN Tabla DE MateriasResponsabilidades DEL Cliente Montaje / PRE-OPERACIÓN Sacar LA Máquina Quitanieves DEL CartónMontar LA Biela Como Preparar SU Máquina QuitanievesDesplegar LA Empuñadura Superior Montaje DE LA BielaDE Mando DE LA Barrena Ver Figs y Controlar LA Presión DE LOS NeumáticosOperación Familiarícese CON SU Máquina QuitanievesCumple CON LOS Requisitos DE Seguridad DE LA A.N.S.I Pararse Controlar LA Eyección DE LA NieveComo Utilizar SU Máquina Quitanieves Usar EL Control DE LA Estrangulación Ver FigMoverse Adelante Y Atrás Ver Fig Lanzar LA Nieve Ver FigUsar LA Herramienta Para Limpiar Ver Fig Antes DE Poner EN Marcha EL Motor Puesta EN Marcha DEL MotorPuesta EN Marcha CON EL Motor Frío Arrancador Eléctrico Consejos Para Lanzar LA NieveAntes DE Parar Lubricación MantenamientoRecomendaciones Generales Maquina QuitanievesMotor LimpiezaConducto Deflector Servicio Y AdjustesPara Ajustar LA Altura DE Máquina Quitanieves Pernos DE Seguridad Ver FigSustituir LAS Correas Vea Fig Vaciar LA Gasolina DEL Depósito DE CarburanteAlmacenimiento OtrosIdentificacion DE Problemas Exploded KEY Part Description Auger Assembly RH Auger HousingAuger Assembly LH Scrapper BARAuger Bearing Bearing PlugWasher Knob BlackPOP Rivet Plastic WasherRotator Pivot Bracket LEVER/CABLE Rotator AssemblyRotator Head Pulley PivotRepair Parts Snow Thrower Model Number 96194000505 Handles Lower Handle Panel Bracket LH Panel Bracket RHHandle Grip Pivot Support WeldmentShifter ROD TOP Impeller ROD AssemblyTraction ROD Assembly Shifter ROD BottomHeadlight Bezel Wire HarnessConsole Panel Flood HeadlightRepair Parts Snow Thrower Model Number 96194000505 Drive Control ARM 43 402689 Drive Plate AssemblyEND Plate Clevis PINRoll PIN 3/16 Repair Parts Drive Snow Thrower Model NumberAxle Shaft SprocketEngine Mount Plate Engine ModelFrame Belt Cover187831X417 Repair Parts Snow Thrower Model Number 96194000505 WheelsWheel Assembly LH 187866X417Retainer PIN Power CordSafety Ignition KEY WrenchDECAL, Danger Repair Parts Snow Thrower Model Number 96194000505 Decals181038 DECAL, DANGER, DeflectorService Notes Service Notes Service Notes Limited Warranty

96194000505 specifications

The Poulan 96194000505 is a powerful and versatile lawn mower designed for homeowners seeking an efficient solution for maintaining their lawns. Known for its reliability and durability, this model is equipped with several features that make lawn care more manageable and enjoyable.

One of the standout characteristics of the Poulan 96194000505 is its potent engine. It typically features a 159cc engine, which provides ample power for handling both small and large yards. The engine is designed for efficient fuel consumption, enabling users to work longer on a single tank while minimizing environmental impact. This combination of power and efficiency ensures that mowing tasks are completed quickly and effectively.

The mower's cutting deck is another highlight. Generally constructed from robust materials, it has a cutting width of 21 inches, allowing for effective grass trimming even in tighter spaces. This size strikes a balance between maneuverability and coverage, ensuring users can navigate gardens with ease. The blade height can be adjusted through multiple settings, allowing homeowners to customize their lawn's appearance according to the season or personal preference.

The Poulan 96194000505 also incorporates advanced technologies that enhance performance and ease of use. The self-propelled feature is particularly beneficial for individuals who may find pushing a heavy mower challenging. With variable speed control, users can adjust the pace of mowing, ensuring maximum comfort during operation.

Ergonomically designed handles provide added convenience, reducing fatigue during extended use. The handles are often adjustable, allowing for a customized height that accommodates users of different statures. Additionally, many models come with a foldable handle, making storage more straightforward and space-saving.

The mower's bagging system is efficient, allowing for easy grass collection and disposal. Some variants may also feature mulching capabilities, returning nutrients to the soil, which can promote healthier lawn growth.

In summary, the Poulan 96194000505 is engineered for exceptional performance, featuring a robust engine, adjustable cutting deck, self-propulsion, and ergonomic design. Whether you have a small garden or extensive yard space, this mower delivers reliability and efficiency, making it a solid choice for maintaining your outdoor space. Its blend of technology and user-friendly characteristics ensures that lawn care can be done with ease and precision.
Top Page Image Contents