REPAIR PARTS SNOW THROWER - MODEL 961980018 (96198001800) WHEELS
KEY | PART |
|
NO. | NO. | DESCRIPTION |
1 | 192092X421 | Wheel Assembly, 16", with Power Steering, LH |
2 | 155443 | Pin, Klik 1/4 |
3 | 405161 | Cover, Power Steering |
4 | 184471 | Screw, Shoulder, Hex Head |
717060410 Screw, Hex Head
8410294 Bracket, Steering Cable, RH
9410293 Bracket, Steering Cable, LH
1017600406 Screw, Hex Head
1117490508 Screw, Hex Head
12405077 Link, Steering Lever
13193506X479 Lever Assembly, Steering
14182015 Pin, Steering Lever
15194944X008 Bellcrank
16194939X008 Bracket Assembly, LH Steering
17194943X008 Bracket Assembly, RH Steering
18181847 Pin, Steering Bellcrank
19 | 85179 | Retainer, Hairpin |
20 | 179148X479 | Bracket, Lever Assembly |
21 | 192126 | Driver, Wheel |
22 | 182466 | Ring, Wire Retainer |
23 | 187622 | Lobe, Wheel |
24 | 194941 | Slide, Clutch |
25 | 179139 | Spring, Clutch Slide |
26 | 194940 | Lobe, Axle |
27189282 Key, Square 1/4 x 1/4 x 7/8
28174697 Washer, Thrust (1")
29 | 179830 | Bearing, Axle |
30 | 193885 | Spring, Return, Steering Latch |
31 | 192093X421 | Wheel Assembly, 16", with Power Steering, RH |
32 | 700279 | Clip, Retainer |
33 | 12000045 | Ring, Retaining |
34 | 146315 | Screw, Tapping, Hex Head |
NOTE: All component dimensions given in U.S. inches. 1 inch = 25.4 mm
IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
31