Poulan PP8527ES owner manual Install Auger Control ROD See Figs, Check Tire Pressure

Page 6

ASSEMBLY / PRE-OPERATION

INSTALL AUGER CONTROL ROD (See Figs. 5 and 6)

The auger control rod has the short loop on the end of the spring as shown.

1.Slide rubber sleeve up rod and hook end of spring into control arm with loop opening up as shown.

2.With top end of rod positioned under right side of control panel, push down on rod and insert end of rod into hole in auger control bracket. Secure with retainer spring.

AUGER

CONTROL

ROD

RUBBER

SLEEVE

CONTROL

ARM

LOOP

OPENING

UP

FIG. 5

AUGER CONTROL ROD

AUGER

RETAINER

CONTROL

LEVER

SPRING

 

AUGER

CONTROL

BRACKET

FIG. 6

INSTALL DISCHARGE CHUTE / CHUTE ROTATER HEAD (See Fig. 7)

NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotater head.

1.Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

2.Position chute rotater head over chute bracket. If neces- sary, rotate chute assembly to align square and pin on un- derside of chute rotater head with holes in chute bracket.

3.With chute rotater head and chute bracket aligned, position chute rotater head on pin and threaded stud of mounting bracket.

4.Install 3/8 washer and locknut on threaded stud and tighten securely.

CHUTE

 

 

ROTATER

 

3/8 LOCKNUT

HEAD

 

 

 

 

3/8 WASHER

 

 

PIN

 

 

THREADED

 

 

STUD

 

ALIGN BEFORE

ROTATER HEAD

CHUTE

MOUNTING

BRACKET

TIGHTENING LOCKNUT

BRACKET

FIG. 7

CHECK TIRE PRESSURE

The tires on your snow thrower were overinflated at the fac- tory for shipping purposes. Correct and equal tire pressure is important for best snow throwing performance.

•Reduce tire pressure to 14-17 PSI (19-24.5 N-m).

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model Number Snow ThrowerSafe Operation Practices for Walk-Behind Snow Throwers Table of Contents Parts Packed Separately in Carton Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Install Speed Control ROD See Figs Install Traction Drive Control ROD See FigsUnfold Upper Handle Install Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingWhen cleaning, repairing, or inspecting, make When traction drive control lever is engagedUsing the CLEAN-OUT Tool See Fig Stopped. Disconnect the spark plug wireBefore Starting the Engine Scraper BARTo Start Engine Snow Throwing Tips Before StoppingIf Recoil Starter has Frozen Maintenance Cleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector To Remove Wheels See Fig Storage OtherTroubleshooting Service Notes 5518 KEY Part Description 205 183334 Knob, Lever Repair Parts Handles Repair Parts Snow Thrower - Model NO. PP8527ES Handles Repair Parts Drive Repair Parts Snow Thrower - Model NO. PP8527ES Drive Page KEY Part Description Page KEY Part Description Limited Warranty

PP8527ES specifications

The Poulan PP8527ES is a versatile and powerful electric chainsaw that stands out in the world of outdoor power equipment. Designed with the user in mind, this chainsaw offers a balance of performance, comfort, and ease of use, making it an excellent choice for both homeowners and professionals alike.

One of the standout features of the PP8527ES is its 27cc two-cycle engine, which delivers ample power for a variety of cutting tasks. Whether you are trimming branches, cutting firewood, or tackling small to medium-sized trees, this chainsaw provides the necessary thrust to get the job done efficiently. The lightweight design further enhances its usability, allowing users to maneuver it comfortably without excessive strain during extended periods of operation.

Another key characteristic of the Poulan PP8527ES is its Easy Start system. This technology significantly reduces the effort required to start the engine, allowing users to get to work quickly and with minimal frustration. The internal components are engineered for durability, featuring a robust design that enhances lifespan and reliability.

Safety is a top priority with the PP8527ES. The chainsaw is equipped with several protective features, including a chain brake system that stops the chain quickly in the event of kickback, helping to reduce the risk of injury. Additionally, the dual-activated throttle lever offers further control, ensuring the user can operate the saw safely at all times.

The 18-inch bar and chain configuration provides a substantial cutting length, making it suitable for a wide range of applications. The automatic chain oiler keeps the chain lubricated while in use, ensuring smooth operation and prolonging the life of the chain while decreasing wear and tear.

Moreover, the Poulan PP8527ES emphasizes user comfort. The ergonomically designed handle allows for a secure grip, minimizing fatigue during prolonged use. The inclusion of vibration dampening technology contributes to a more comfortable cutting experience, reducing vibrations transmitted to the user's hands.

In conclusion, the Poulan PP8527ES electric chainsaw is a reliable, safe, and efficient tool that is perfect for both novice and experienced users. Its combination of power, ease of use, and thoughtful safety features make it a top choice in outdoor power equipment, ensuring that it can handle various tasks with ease and precision. Whether you're maintaining your garden or tackling larger projects, the PP8527ES delivers the performance you need to get the job done right.
Top Page Image Contents