PRECAUTIONS
Please read and observe all warnings and instructions in this owner,s manual and those marked on the unit. Retain this booklet for future reference.
There are two kinds of alarm symbols as follows:
A/V AND POWER CONNECTIONS
WARNING
CAUTION
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of
dangerous voltage 
within the product,s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to people.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
DVD PLAYER |
GAME |
CAMCORDER |
+12V DC Battery RED
Red AUDIO (R)
White AUDIO (L)
Chassis Ground BLACK
Yellow VIDEO 1 
Yellow VIDEO 2
Door switch YELLOW
WARNING
Installation of all TV monitors must be out of the drivers field of vision.
Do not try and service these products yourself. Seek only a qualified service center or factory service center.
Be careful not to drop or apply pressure to the front panel of your video monitor. If the screen cracks due to misuse, your warranty will be void!
Be careful not to overload your cigarette lighter plug by adding more than one device at a time.
3
Do not mount the product where it will obstruct the deployment of the airbag or in an area where it would affect the vehicular control. Also be careful to avoid mounting the product where it can become hazardous during sudden stops or in the event of an accident.
Use extra caution with any liquids in your car. If you or your child
spills any liquid on these products, pull your vehicle to the roadside and turn the key off to disconnect
or wipe the products with a towel. Do not operate the equipment until all liquids have either evaporated or you have had the monitor inspected at a service center by a qualified technician, Severe harm or danger can occur.
Use only a damp cloth to clean the screen and use only purified water on the cloth. Wring out all excess water prior to wiping the screen. Do not use any cleaners or chemicals to clean the screen. In most cases a dry cloth will do!
Switch to 0: Door switch connect to ground
Switch to
+IR 12V + | GND | +ACC |
8