MTD 769-01275C warranty Augers, Drive Belt Replacement

Page 16

5 1

Maintaining

Your Snow

Thrower

Augers

•The augers are secured to the spiral shaft with two shear pins and cotter pins. If the auger should strike a foreign object or ice jam, the snow thrower is designed so that the pins may shear. Refer to Figure 9.

•If the augers will not turn, check to see if the pins have sheared. One set of replacement shear pins has been provided with the snow thrower. When replacing pins, spray an oil lubricant into shaft before inserting new pins.

Drive Belt Replacement

To remove and replace your snow thrower’s auger belt, proceed as follows:

1.Remove the plastic belt cover on the front of the engine by removing the two self-tapping screws.

NEVER replace the auger shear pins with anything other than OEM Part No.738-04124 replacement shear pins. Any damage to the auger gearbox or other components as a result of failing to do so will NOT be covered by your snow thrower’s warranty.

2

3

�

�

 

�

•Drain the gasoline from the snow thrower, or place a piece of plastic under the gas cap.

•Carefully pivot the snow thrower up and forward so that it rests on the auger housing.

2.Remove the frame cover from the underside of the snow thrower by removing four self-tapping screws which secure it.

3.a. Grasp the idler pulley and pivot it toward the right.

b.Roll the auger belt off the engine pulley.

c.Lift the drive belt off engine pulley.

4.Slip the drive belt off the pulley and between friction wheel and friction wheel disc.

• Remove and replace belt in the reverse order.

4

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Form no -01275C MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio06/13/2005 Table of Contents Chute clean-out tool is fastened to the top Your ResponsibilityTrainingPreparation Your Responsibility Restrict the useMaintenance & Storage OperationDo not modify engine Your ResponsibilitySetting Up Your Snow Thrower Position the chute assembly over the baseAuger Control Skid ShoesTire Pressure Remove the flat washer and hairpin clip from the endOperating Your Snow ThrowerOperating Your Snow Thrower Gas & Oil Fill-Up Stopping The EngineIf your home’s Electric StarterChute Clean-Out Tool To Engage DriveTo Engage Augers Recoil StarterMaking Adjustments Shift CableChute Bracket Adjustment To adjust the skid shoesRetightening the nuts Surrounding propertyMaintaining Your Snow Thrower EngineLubrication Shave Plate and Skid ShoesAuger Belt Replacement Drive Belt Replacement That it rests on the auger housing Assembly off the shaftFriction Wheel Removal Cracking and replace if necessaryPreparing Engine Off-Season StoragePreparing Snow Thrower Trouble Shooting Styles E & F To order replacement Parts, contact Or visit Styles E & F 790-00209 710-1233711-04287 Pivot Rod 712-04063 Nut, Hex, 1/4-20, ShoulderStyles E & F Found on models with a Inch auger housing only Disc, Friction Wheel684-04153 684-04154Page Page MANUFACTURER’S Limited Warranty for

769-01275C specifications

The MTD 769-01275C is a versatile lawn mower designed for both efficiency and ease of use. It is particularly favored by homeowners who take pride in maintaining their lawns and gardens. This model combines several advanced technologies, making it a reliable choice for many landscaping tasks.

One of the standout features of the MTD 769-01275C is its powerful engine. Powered by a robust 382cc engine, this mower delivers ample power to tackle various grass conditions, allowing it to operate effectively even in tougher terrains. The engine is designed with efficiency in mind, ensuring that users experience reduced fuel consumption without sacrificing performance.

Another key characteristic of the MTD 769-01275C is its cutting deck. The mower typically features a 30-inch steel cutting deck, which provides a wide cutting path, enabling users to mow their lawns quickly and efficiently. The steel construction ensures durability, while the design of the deck allows for exceptional maneuverability in tight spaces, making it suitable for smaller yards and intricate landscaping.

In terms of cutting height adjustments, the MTD 769-01275C offers various settings that let users customize their mowing height. This versatility ensures that different grass types can be managed effectively, promoting healthy growth while allowing gardeners to achieve their desired lawn aesthetics.

The mower is also equipped with user-friendly technologies. One notable feature is its easy-to-use electric start system, which eliminates the hassle of manual pull starts. This is particularly beneficial for those who may have difficulty with traditional starting methods. Additionally, the mower features a comfortable operator's seat and control layout, enhancing the overall user experience and reducing fatigue during prolonged use.

Another important aspect is its maintenance features. The MTD 769-01275C is designed with accessibility in mind, making routine maintenance tasks such as oil changes and blade replacements simpler for the user. This promotes longevity and reliability, ensuring that the mower remains in good working condition for years.

In summary, the MTD 769-01275C stands out as an efficient and user-friendly lawn mower. Its powerful engine, durable cutting deck, customizable cutting heights, and user-centric technologies make it a solid choice for homeowners who demand quality in their lawn care products. With proper maintenance, this mower can deliver consistent performance, helping users achieve beautifully manicured lawns season after season.
Top Page Image Contents