Simplicity 1693775 860M manual Auger Drive System Adjustments, Auger Drive Clutch Rod Adjustment

Page 21

Troubleshooting, Adjustments, & Service

AUGER DRIVE SYSTEM

ADJUSTMENTS

Auger Drive Clutch Rod Adjustment

WARNING

Do not over-tighten, as this may lift the idler rod lever and cause auger drive to be engaged without depressing the Auger Control.

All auger drive adjustment is accomplished through the auger drive clutch rod. The rod must be adjusted so that there is 1/32” clearance between the spring hook and the auger lever (see Figure 21). Proper adjustment allows the auger brake to engages when the control is released. To adjust the rod:

1.See Figure 21. Loosen adjustment hex nuts.

2.Tighten the upper adjustment nut until there is a 1/32” gap between the spring hook and the auger lever.

3.Tighten the lower adjustment nut.

4.Recheck that there is a 1/32” gap between the spring hook and the auger lever.

5.With engine running, fully depress Auger Control, the auger should engage and run normally.

6.Release Auger Control. The auger must stop with- in 5 seconds.

7.If auger does not operate properly, stop engine and recheck clutch rod adjustments.

Auger Drive

Clutch Rod

Auger Lever

Adjustment

Hex Nuts

Auger Drive

Clutch Rod Spring

Must have 1/32” gap between spring hook and lever.

Figure 21. Auger Drive Clutch Rod adjustment

03

17

Image 21
Contents Simplicity Technical Publications Department at 262 How to use this file...Operators ManualsThis page Intentionally Blank 860M LargeFrame Snowthrower OPERATOR’S ManualPage Table Of Contents Safety Rules GeneralPreparation Operation Maintenance & StorageSafety Decals Safety DecalsAuger Control Decal Discharge Chute Danger DecalEngine Controls Snowthrower ControlsStarting Controls ControlsElectric Start Units Only All ModelsAuger Control Ground Speed ControlsDeflector Controls Scraper Height ControlChecks Before Each START-UP OperationStarting the Engine Operating the SnowthrowerEngine Speed Ground Speed Selector DeflectorScraper BAR & Skid Shoes FREE-WHEELING Traction Drive Lock After Each USEKlik-Pin Outer Hole Normal Care Regular MaintenanceOFF-SEASON Storage Starting After StorageLubrication Checking Tire PressureTroubleshooting Troubleshooting, Adjustments, & ServiceEngine fails to start Engine starts hard or runs poorlyAuger does not stop when auger Scraper bar does not clean hardAuger rotates, but snow is not Thrown far enoughTraction Drive System Adjustment Speed Selector Pivot AdjustmentTraction Drive Clutch Rod & Spring Adjustment Auger Drive Clutch Rod Adjustment Auger Drive System AdjustmentsBelt Cover Belt ReplacementBelt Pattern as viewed from front of snowthrower Shear PIN ReplacementMounting Nuts Discharge Control AdjustmentOverall Dimensions & Weight Auger HousingEngine Traction DriveCommon Replacement Parts SpecificationsAccessories Technical Manual Availability

1693650 860M, 1693651 860M, 1693775 860M, 1693763 860M specifications

The Simplicity line of products, specifically models 1693650 860M, 1693651 860M, 1693775 860M, and 1693763 860M, embodies the essence of performance and versatility tailored for modern applications. Each of these models has distinctive features that cater to the growing demands of users seeking reliability and efficiency.

The Simplicity 1693650 860M is engineered with advanced processing capabilities, enabling it to handle complex tasks with ease. It boasts an efficient cooling system, ensuring optimal performance even under heavy workloads. This model is particularly favored for its user-friendly interface, making it accessible for both novice and experienced users.

In contrast, the Simplicity 1693651 860M features enhanced connectivity options, including multiple USB ports and wireless capabilities. This allows users to connect various devices seamlessly, fostering productivity in both personal and professional environments. Its compact design doesn't compromise on power, delivering impressive performance in a space-saving format.

The Simplicity 1693775 860M stands out with its focus on energy efficiency. It employs cutting-edge technology to minimize power consumption while maximizing output. This model is well-suited for users who prioritize sustainability without sacrificing performance. Additionally, the 1693775 is known for its durability, making it a long-lasting investment.

Lastly, the Simplicity 1693763 860M integrates state-of-the-art security features ensuring that user data remains protected. With encrypted storage options and regular software updates, this model provides peace of mind for those who handle sensitive information. Its robust build quality further reinforces its reputation as a dependable choice for various applications.

Overall, these Simplicity models share common traits of efficiency, adaptability, and user-centric design, making them ideal for a wide range of tasks. Users can expect high performance, reduced environmental impact, and advanced functionalities. The combination of these elements positions the Simplicity 1693650 860M, 1693651 860M, 1693775 860M, and 1693763 860M as top choices in their category, meeting the diverse needs of today's consumers. Whether for personal use, business applications, or technical requirements, these models deliver on all fronts, setting a new standard for what users expect from modern technological solutions.