MTD 737-0168 manual Making Adjustments, Chute Bracket Adjustment

Page 13

SECTION 5: MAKING ADJUSTMENTS

Drive Control

When the drive control is released and in the disengaged “up” position, the cable should have very little slack. It should NOT be tight.

Check the adjustment of the drive control as follows:

1.With the drive control released, push the snow thrower gently forward. The unit should roll freely.

2.Engage the drive control and gently attempt to push the snow thrower forward. The wheels should not turn. The unit should not roll freely.

3.With the drive control released, move the shift lever back and forth between the R2 position and the F6 position several times. There should be no resistance in the shift lever.

If any of the above tests failed, the drive cable is in need of adjustment. refer to the figure at the right and proceed as follows:

Loosen the hex jam nut on the auger control cable “Z” fitting and rotate the coupling end of the cable downward to provide more slack or upward to take up slack. See Figure 3.

Retighten the hex jam nut and repeat all three tests to verify proper adjustment has been achieved.

Skid Shoes

The space between the skid shoes and the ground can be adjusted. See Figure 4.

For close snow removal on a smooth surface, raise skid shoes higher on the auger housing.

Use a middle or lower position when the area to be cleared is uneven, such as a gravel driveway.

CAUTION: Loose gravel can be picked up and thrown by the auger, causing injury to the operator and bystanders and/or damage to the snow thrower and surrounding property.

Adjust skid shoes by loosening the four hex nuts (two on each side) and carriage bolts. Move skid shoes to desired position.

Make certain the entire bottom surface of skid shoe is against the ground to avoid uneven wear on the skid shoes. Retighten nuts and bolts securely.

Chute Bracket Adjustment

If the spiral at the bottom of the chute directional control is not fully engaging with the chute assembly, the chute bracket can be adjusted. To do so, loosen the two nuts which secure the chute bracket and reposition it slightly before retightening the nuts. See Figure 5.

Figure 3

Figure 4

Figure 5

13

Image 13
Contents Operator’s Manual Table of Contents Training Important Safe Operation PracticesPreparation Operation Maintenance & StorageDo not modify engine Your ResponsibilitySecuring the Handle Assembling Your Snow ThrowerTire Pressure Attaching the Chute Assembly and Directional ControlKnow Your Snow Thrower Chute Assembly Clean-Out ToolAuger Control Drive ControlBefore Starting Gas & Oil Fill-Up Operating Your Snow ThrowerStarting The Engine Recoil StarterTo Engage Drive Stopping The EngineTo Engage Augers Auger Control TestOperating Tips Chute Clean-Out ToolDrive / Auger Lock on models so equipped Chute Bracket Adjustment Making AdjustmentsTire Pressure Lubrication EngineShave Plate and Skid Shoes Auger Belt Replacement Drive Belt Replacement Friction Wheel Removal OFF-SEASON Storage Trouble Possible Causes Corrective Action Trouble Shooting GuidePage Parts List Styles C & D 457 48 57 2933 Styles C & D 12 15 634-04144 13 x 634-04151 MANUFACTURER’S Limited Warranty for

737-0168 specifications

The MTD 737-0168 is a robust and versatile lawn mower designed for both residential and light commercial lawn care. Known for its innovative features and user-friendly design, this mower stands out in the crowded landscape of gardening equipment.

One of the primary characteristics of the MTD 737-0168 is its powerful engine. Equipped with a reliable, fuel-efficient motor, it provides ample power to tackle various lawn types, whether it’s a manicured backyard or a more rugged terrain. The engine’s design emphasizes efficiency, ensuring that users can complete their mowing tasks without interruptions due to fuel depletion or mechanical failures.

The MTD 737-0168 features a wide cutting deck that allows for efficient mowing of larger areas in fewer passes. This deck can typically cut grass to multiple height settings, enabling users to choose the perfect length for their lawn. This flexibility not only promotes healthier grass growth but also ensures that the mower can adapt to different seasonal conditions and types of grass.

In terms of technology, the MTD 737-0168 integrates advanced blade design, promoting cleaner cuts and reducing collateral lawn damage. The blades are often crafted from high-quality materials that enhance durability, ensuring they remain effective for numerous mowing seasons. Additionally, the mower may feature mulching capabilities, allowing users to recycle grass clippings back into the lawn, thereby enriching the soil and reducing waste.

Another noticeable feature of the MTD 737-0168 is its ergonomic design, which aims to enhance user comfort. The handle is generally adjustable, allowing users of different heights to maintain a comfortable posture while mowing. This thoughtful design can help reduce fatigue during longer mowing sessions, making it suitable for homeowners who pride themselves on lawn maintenance.

User-friendly controls are also a key focus of the MTD 737-0168, with easy-to-access throttle and blade engagement options. This accessibility simplifies operation, making it accessible for both experienced users and those new to lawn care.

Overall, the MTD 737-0168 stands as a testament to MTD’s commitment to quality and functionality. With its powerful performance, versatile features, and user-focused design, this mower appeals to a broad audience looking for an efficient solution for maintaining their lawns. It represents a harmonious blend of traditional lawn care requirements with modern technological advancements, making it a worthwhile investment for any homeowner.