MTD 31AE640F352 Operating Your Snow Thrower, Before Starting, Gas And Oil Fill-up, Recoil Starter

Page 7

Traction/Auger

Shift Lever

Control Lock

Auger Control

Discharge Chute

Chute

Clean-out Tool

Chute Directional Control

Auger

Figure 4

Spark Plug

Choke

Primer

Recoil Starter

Handle

Ignition Key

Throttle Control

SECTION 4: OPERATING YOUR SNOW THROWER

Before Starting

WARNING: Read, understand, and follow all instructions and warnings on the machine and in this manual before operating.

•The spark plug wire was disconnected for safety. Attach spark plug wire to spark plug before starting.

Gas And Oil Fill-up

•At the factory, a plastic cup is inserted inside the fuel tank’s fill opening (beneath the fuel cap) to prevent debris from entering the fuel tank during assembly. Remove and discard this cup before filling up the tank.

WARNING: Use extreme care when handling gasoline. Gasoline is extremely flammable and the vapors are explosive. Never fuel machine indoor or while the engine is hot or running. Extinguish cigarettes, cigars, pipes and other sources of ignition.

Starting Engine

IMPORTANT: Prior to operating your snow thrower, read, understand and follow ALL instructions to perform adjustments found under the heading Auger Control Test on page 8 of this manual.

•Attach spark plug wire to spark plug. Make certain the metal loop on end of the spark plug wire (inside the boot) is fastened securely over the metal tip on the spark plug. See Figure 5.

Metal Loop

Rubber Boot

Figure 5

•Make certain the fuel shut-off valve, if so equipped, is in the OPEN (vertical) position.

•Make certain the auger and traction controls are in the disengaged (released) position.

•Move throttle control up to FAST position. Insert ignition key into slot. Be certain it snaps into place. Do not turn key. See Figure 4.

NOTE: Engine will not start unless ignition key is inserted into ignition slot in carburetor cover. Do not turn ignition key.

Recoil Starter:

•Rotate choke knob to FULL choke position (cold engine start).

•If engine is warm, place choke in OFF position instead of FULL.

•Push primer button three or four times for cold engine start.

•If engine is warm, push primer button once only.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents OPERATOR’S Manual Table of Contents Training Important Safe Operation PracticesMaintenance and Storage Loose Parts AssemblyLamp Wiring Assembling Your Snow ThrowerGas and Oil Know Your Snow ThrowerOperating Controls Starting Engine Operating Your Snow ThrowerBefore Starting Gas And Oil Fill-upTo Engage Drive To Stop EngineTo Engage Augers Snow Thrower Model Drift Cutter Kit Chute Clean-out ToolOperating Tips Snow Thrower ModelTraction Control and Shift Lever Chute AssemblyAuger Control Tire PressureDrive Wheels Skid ShoesLubrication Maintaining Your Snow ThrowerShave Plate and Skid Shoes ServiceBelt Replacement AugersDrive Belt Changing Friction Wheel RubberTrouble Possible Causes Corrective Action Trouble Shooting GuideModel 31AE640F352 Parts List Model 31AE640F352 Model 31AE640F352 Wheel Chart Model 1833 746-0897 Drive Cable 731-2643 Chute Clean-out Tool Model 31AE640F352 Model 31AE640F352 MANUFACTURER’S Limited Warranty for

31AE640F352 specifications

The MTD 31AE640F352 is a powerful and versatile engine designed for a variety of applications, particularly in the field of outdoor power equipment. Recognized for its reliability and performance, this engine is a perfect choice for lawn mowers, tillers, and other landscaping tools.

One of the standout features of the MTD 31AE640F352 is its robust construction. The engine utilizes a cast-iron cylinder sleeve, which not only enhances durability but also improves heat dissipation. This is crucial in maintaining optimal operating temperatures, especially during prolonged use. The engine's design is engineered for easy maintenance, making it user-friendly for both professionals and hobbyists.

The MTD 31AE640F352 is powered by a four-stroke engine, which contributes to its efficiency and fuel economy. With a displacement of 196cc, this engine provides ample power for a range of tasks while ensuring low emissions, adhering to environmental regulations. The engine's overhead valve (OHV) design allows for better airflow and greater combustion efficiency, resulting in improved torque and horsepower.

Additionally, the MTD 31AE640F352 features an integrated recoil starter and a primer bulb, which facilitate quick and effortless starting, even in cold conditions. This ensures that users can get to work without delays, maximizing productivity. The engine's air filtration system is designed to minimize dust and debris intake, prolonging the engine's lifespan and reducing maintenance frequency.

Another notable characteristic is the quiet operation of the MTD 31AE640F352, making it a suitable choice for residential areas where noise regulations may be a concern. The engine operates smoothly with reduced vibration, providing a comfortable experience for the user.

In terms of versatility, this engine can be found in various MTD products, showcasing its adaptability across different applications. Whether it’s powering a lawn mower or a snow blower, the MTD 31AE640F352 delivers consistent performance, meeting the needs of various outdoor tasks.

Overall, the MTD 31AE640F352 stands out in the engine market for its combination of power, efficiency, and user-friendly features. With its reliable performance and durable construction, it continues to be a preferred choice for numerous outdoor power equipment applications, catering to both residential and commercial users alike.
Top Page Image Contents