MTD 31AE633E401, 31AE663H401 manual Table of Contents

Page 2

TABLE OF CONTENTS
Content	Page
Important Safe Operation Practices	3
Assembling Your Snow Thrower	5
Know Your Snow Thrower	9
Operating Your Snow Thrower	10
Making Adjustments	12
Maintaining Your Snow Thrower	13
Service	14
Troubleshooting	17
Parts List	18

FINDING MODEL NUMBER

This Operator’s Manual is an important part of your new Snow Thrower. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Before you start assembling your new equipment, please locate the model plate on the equipment and copy the information from it in the space provided below. The information on the model plate is very important if you need help from our Customer Support Department or an authorized dealer.

•You can locate the model number by looking at the lower frame cover in the rear of your snow thrower. A sample model plate is explained below. For future reference, please copy the model number and the serial number of the equipment in the space below.

(Model Number)		(Serial Number)		Copy the model number here:
		(Serial Number)

				Copy the serial number here:
	MTD PRODUCTS INC
CLEVELAND, OHIO 44136

CALLING CUSTOMER SUPPORT

If you have difficulty assembling this product or have any questions regarding the controls, operation or maintenance of this unit, please call the Customer Support Department.

Call 1- (330) 220-4MTD(4683) or 1- (800)-800-7310to reach a Customer Support representative. Please have your unit’s model number and serial number ready when you call. See previous section to locate this information. You will be asked to enter the serial number in order to process your call .

2

Image 2

Contents Operator’s Manual Table of Contents Preparation Important Safe Operation PracticesTraining OperationMaintenance And Storage Your ResponsibilityLoose Parts Assembling Your Snow ThrowerUnpacking Assembling HandleAttaching Chute Directional Control Model E633EChute Directional Control Support Bracket Final AdjustmentsModel 663H Traction Control and Shift LeverSkid Shoe Tire Pressure Pneumatic TiresKnow Your Snow Thrower Gas and Oil Fill-Up Operating Your Snow ThrowerBefore Starting To Start EngineTo Engage Augers To Stop EngineTo Engage Drive Operating TipsSkid Shoe Chute AssemblyAuger Control Traction ControlLubrication Maintaining Your Snow ThrowerDrive Wheels Shave Plate and Skid Shoes ServiceBelt Removal and Replacement Drive Belt Housing SpringChanging Friction Wheel Rubber AugerAugers EngineTroubleshooting Problem Cause RemedyParts List for Models E633 and E663 Models E633 and E663 Part DescriptionDrive Clutch Cable Part Description Ref. No Models E633 and E663 Ref. No Part Description Ref. No Part DescriptionModel E633 Ref. No. Part No Part DescriptionModel E663 Model E633 Model E663 MANUFACTURER’S Limited Warranty for