Simplicity 960 manual Engine and Frame Group 9HP Manual Start

Engine and Frame Group - 9HP Manual Start

NOTE: Unless noted otherwise, 986377

use the standard hardware torque specification chart.

Position idler pulley (Ref. 25) at center of slot in clutch arm (Ref. 22).

3

1	Use 0-2 washers
	between Ref. 40

&22 to assure a centered belt and no

		interference between			5
		pulleys Ref. 19 & 25.
			25	26	6	Hook one end of spring (Ref. 27)
				39	4	over clutch rod assembly (Ref. 22)
		40
						between tabs and other end into
		39				slot in frame.
		39				7	44
		18
							45
				27				42
		23		21			46
		22
2		20	24				47
	19

21 8

18

48

Long hub of idler pulley (Ref. 19) to be toward idler arm (Ref. 16).

17	16
	15
	14

41

8

13

28

9

11

10

12

Torque to	37	38
10-14 ft. lbs. or
14-20 N m

36

32

33

34

29

31	43
	29	30

Hook one end of spring (Ref. 15) into top hole of roller arm (Ref. 16) and other end into top hole of the idler

arm assembly in the Traction Drive Group.

35

Right rear bolt.

Position belt stop (Ref. 33) 1/16 to 1/8 inch from belt when auger clutch is engaged.

The above parts group applies to the following Mfg. Nos.:

1694435 - 960M

© Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved. 14 TP 400-3890-01-LW-S