Tascam owner manual Parts of the CD-D4000

Page 5

1.2 Parts of the CD-D4000

The following refer to front panel items only. The only rear panel feature is the power cord, which should be plugged into a power supply that matches the voltage shown on the rear panel label.

1POWER switch

Press this switch once to power on the unit, and again to turn it off.

PLAUGGABLE EQUIPMENT, that the socket- outlet shall be installed near the equipment and shall be easily accessible.

2Display

The 2 x 16 LCD display displays the menus and sub- menus available, and also provides information on the status of the current operation, as well as display- ing error messages, etc.

3MODE key

The MODE key is used to cycle through the different menus and options available to put the unit into the different modes, as explained below.

4ENTER key

The ENTER key is used to confirm the selection of menu items and options. It also acts as a “start” key to start operations.

5MASTER drive

The MASTER drive is used to hold the source CD. This may be a pre-recorded audio CD or CD-ROM which you have permission to copy, a CD-R or a CD- RW disc.

The eject button is used to eject the master disc when no operation is in progress. The indicator on this drive shows when the disc is being accessed.

1 - Introduction

In the “Play audio” mode (see 2.5, "Play audio track"), a pre-recorded CD may be inserted into this drive, and played back, track by track. The head- phone jack and volume controls of this drive are operational in this mode only.

6SLAVE drive

The SLAVE drive holds the destination CD. This must be a CD-R disc. The CD-D4000 cannot record on CD-RW discs (but can use them in the MASTER drive as source discs).

The eject button is used to eject the slave disc when no operation is in progress. The indicator on this drive shows when the disc is being accessed for read- ing or writing.

In the “Play audio” mode (see 2.5, "Play audio track"), an audio CD may be inserted into this drive, and played back. The headphone jack and volume controls of this drive are operational in this mode only.

NOTE

If a disc is in a drive and cannot be removed by using the eject button, you can insert a thin stiff wire (such as the end of a paperclip) into the hole on the front panel of the drive (under the tray). This will open the tray.

TASCAM CD-D4000 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents CD-D4000 Important for U.K. Customers Important Safety PrecautionsImportant Safety Instructions Specifications Installing the CD-D4000Introduction IntroductionParts of the CD-D4000 Basic operations Disc copy ModesPossible problems when copying or in test write mode Test write modePlay audio track Error conditionsCompare CD-ROM Setting the writing speed Dimensional drawing SpecificationsOperational specifications Physical specificationsCD-D4000

CD-D4000 specifications

Tascam has been a prominent name in the audio industry, and the CD-D4000 is a shining example of their commitment to high-quality sound and versatile functionality. This professional dual CD player and recorder is tailored for audio applications, including live performances, studio work, and broadcasting.

The CD-D4000 features a robust design with two CD drives that enable simultaneous playback and recording. This dual functionality is particularly advantageous for DJs and live sound engineers, allowing seamless transitions and mixing from one track to another. With its advanced digital processing capabilities, the unit ensures superior audio fidelity, making it suitable for high-end audio tasks.

One of the standout features of the CD-D4000 is its digital output options. Equipped with both coaxial and optical digital outputs, it can easily integrate into various audio setups. This flexibility allows users to connect to digital mixing consoles, audio interfaces, or other studio equipment without compromising sound quality.

The user interface of the CD-D4000 is intuitive and user-friendly. The large LCD display provides clear visibility of track information, playback status, and time elapsed, making it easy for users to monitor their sessions. Additionally, the straightforward navigation controls enable quick access to functions like track selection, looping, and pitch adjustment.

For recording purposes, the CD-D4000 offers a high-quality CD-R and CD-RW recording capability. This feature is crucial for artists and producers who wish to create physical copies of their music with ease. The unit also supports various CD formats, ensuring compatibility and flexibility in playback.

The CD-D4000 is also designed with reliability in mind. Its sturdy build and components are engineered to withstand the rigors of professional use, making it a trusted tool for both live and studio applications. Added features, such as cueing and seamless track programming, enhance its usability in performance environments.

Moreover, the unit's pitch control and tempo functions allow for creative manipulation of audio during performances, enabling artists to match beats and create unique mixes live.

In conclusion, Tascam's CD-D4000 is a professional-grade audio tool that excels in its dual functionality of CD playback and recording. With its user-friendly interface, versatile connectivity options, and robust features, it is an ideal choice for audio professionals seeking reliability and quality in their sound equipment. Whether in a studio, at a gig, or during a broadcast, the CD-D4000 stands out as a dependable and powerful asset in any audio arsenal.
Top Page Image Contents