AUGER HOUSING, DRIVE SYSTEM, CHASSIS
Item | Part No | Qty | Description | Note |
31 | 7024626 | 1 | PULLEY, Idler | 19” Models |
31 | 7027460 | 1 | PULLEY, Single Flange Idler | 17” Models |
32 | 7090669 | 1 | SCREW, |
|
33 | 7024621 | 1 | SPRING, Idler Torsion |
|
34 | 7024620 | 1 | BUSHING, Pivot |
|
35 | 7091195 | 3 | SCREW, |
|
36 | 7033692 | 1 | AXLE, 3/8” Dia. Wheel |
|
37 | 7014098 | 4 | WASHER, 3/8” Flat |
|
38 | 7026160 | 2 | WHEEL, 7 x 1.50 |
|
38 | 7026240 | 2 | WHEEL, 7” | Models 3190M, 3190E & Series |
|
|
|
| 1 |
39 | 7014667 | 2 | PUSH NUT, 3/8” |
|
40 | 7090010 | 5 | WASHER, #10 Flat |
|
41 | 7024852 | 1 | SUPPORT, Fuel Tank |
|
42 | 7091573 | 1 | BOLT, | Was 90666 |
43 | 7090372 | 1 | NUT, |
|
44 | 7027924 | 2 | SPACER, Hex (2.69” long) | 17” Models |
44 | 7027925 | 2 | SPACER, Hex (3.69” long) | 19” Models |
45 | 7035947 | 1 | BLADE, Scraper | 17” Models |
45 | 7035948 | 1 | BLADE, Scraper | 19” Models |
46 | 7091148 | 4 | SCREW, |
|
47 | 7090372 | 4 | NUT, |
|
48 | 7090372 | 2 | NUT, | Was 91099 |
49 | 7047026 | 1 | WELDMENT, Auger | 17” Models |
49 | 7047025 | 1 | WELDMENT, Auger | 19” Models |
50 | 7029566 | 4 | SHOE, Flite | 17” Models |
51 | 7018638 | 4 | SHOE, Flite | 19” LE Models |
51 | 7029565 | 4 | SHOE, Flite | Models 3190M, 3190E & 19” |
|
|
|
| Series 1 |
51 | 7014612 | 2 | SHOE, Center Flite |
|
52 | 7091286 | 24 | SCREW, |
|
53 | 7090391 | 1 | WASHER, 5/16” Internal Tooth Lock |
|
54 | 7090052 | 1 | WASHER, 1/4” Split Lock |
|
55 | 7010935 | 2 | WASHER, 3/4” Flat |
|
Footnotes:
Note* Riveted housing, throat & ring assembly with scraper installed
Note** 1994 & earlier models use a different belt guard & one hex spacer. If replacing item 5 belt guard, install (2) item 44 hex spacers & hardware.
(L.E.) SINGLE STAGE |
| Manual No. | 7006026 |
SERIES 0 & 1 | 11 | TP |