Snapper 7555, 8560 manual Service

Page 28

DRIVE BELT REPLACEMENT (Cont.)

Traction Drive Belt Replacement (Cont.)

5.Reverse the procedure to install the new belt. Be

sure there are no twists in the belt, and that the belt is properly seated in the pulley grooves.

6.Replace the belt cover.

7.Start the unit, and check the traction drive for proper operation. See "Traction Clutch Cable Adjustment" for adjustment procedures.

Auger Drive Belt Replacement

1.Remove gas from fuel tank and run engine until it stops running from lack of fuel.

2.Disconnect spark plug wire and fasten it away from the spark plug.

3.Remove belt cover (See Figure 25).

4.Loosen auger belt guide and slide belt off engine pul- ley and away from idler pulley. (See Figure 28).

5.Clamp or tie auger control lever to handle in the fully depressed position to release all tension on the auger pulley brake pad, and provide clearance for belt removal.

6.Tilt unit forward and rest on auger housing.

7.Remove lower cover.

8.Loosen hex screw securing belt stop (Figure 30), and pivot the belt stop away from the pulley to permit removal of belt.

9.Pull the belt out of the unit, and install the new belt on the auger drive pulley.

10.Position belt stop to provide 1/8" clearance between stop and belt, and and tighten securely.

11.Replace lower cover.

12.Return unit to normal upright operating position.

13.Release auger control.

14.Install auger belt over engine pulley.

15.Adjust auger belt stop as described under ADJUST-

ING BELT GUIDES.

16.Install belt cover.

17.Connect spark plug wire and fill fuel tank.

18.Start unit and check auger for proper operation. See "Auger Drive Clutch Cable Adjustment" for adjust- ment procedures if additional adjustment is neces- sary.

Service

WARNING

Auger must NOT rotate unless the Auger Control lever has been depressed, and auger must stop within 5 seconds after Auger Control lever has been released.

WARNING

Do not go near the discharge chute or auger

when the engine is running. Do not run the engine with any cover or guard removed.

ger Drive Pulley

Figure 30. Auger Drive Pulley and Belt Stops

27

Image 28
Contents Models 7555 Models 8560Tableof Contents SafetyRules& Information Safety Rules ChildrenPage North American / CE Models CE Models only CE Identification TAG MarkingsID Tag Location SafetyDecals GeneralNorth American Model Decals CE Model DecalsCFSafety Ir.nns& CnmnlianceSpecS ALL Models Tecumseh Models Briggs & Stratton ModelsFeatures& Controls Control LocationsEngineControls Starting ControlsManual Start Electric Start Button North American ModelsGround Speed Controls CnntrnlsDeflector Controls Operation Checks Before Each START-UPFl.nP.Patinn Starting the EngineOperating the Snowthrower Clearing a Clogged Discharge ChuteGround Speed Selector Engine SpeedDeflector Scraper BAR & Skid ShoesChute Deflector Skid Shoe NutsFREE-WHEELING Traction Drive Lock After Each USEKlik-Pin Inner HoleChecking Tire Pressure Maintenance ScheduleCheck Auger Gear Case Lubrication Lubrication MaintenanceDisengaging Lubricating the Auger Shaft Assembly StnrageLubrication Check / Lubricate FREE-HAND Linkage StorageEngine starts hard or runs poorly TroubleshootingAuger does not rotate Troubleshooting Adjustments Speed Selector Pivot AdjustmentTraction Drive Clutch Cable Adjustment Initial AdjustmentManual Discharge Chute Control Linkage Adjustment Chute Direction Control ROD Gear AdjustmentPinion Gear Adjustment Mounting NutsDrive Belt Adjustment Auger Drive Clutch Cable AdjustmentDrive Pulley Front Auger Checking Auger Belt & Belt Guide Adjustments Adjusting Auger Drive BeltAdjustments& Service Drive Belt ReplacementAdjusting Auger Belt Guide Traction Drive Belt ReplacementService Service Roller Chain ReplacementShear PIN Replacement Keeper linkDimensions SpecificationsEnginechassis CE ComplianceReplacementParts& Accessories Replacement PartsMaintenance Items Technical ManualsMANUFACTURING, INC

8560, 7555 specifications

The Snapper 7555 and 8560 are robust and efficient riding lawn mowers designed to deliver optimal performance in both residential and commercial landscaping. These models are equipped with advanced features and technologies that make lawn care easier and more effective.

One of the standout features of the Snapper 7555 and 8560 is their powerful engine performance. Both models are powered by reliable Briggs & Stratton engines, ensuring that they deliver the necessary power for mowing even the toughest grass types. The Snapper 7555 has a 22-horsepower engine, while the 8560 boasts a more powerful 25-horsepower engine, allowing them to tackle larger yards and more challenging terrains.

The cutting decks on both models are designed for precision and durability. The Snapper 7555 comes with a 55-inch cutting deck, while the 8560 features an impressive 60-inch deck, enabling quicker and more efficient mowing sessions. Both decks are crafted from a heavy-duty steel material that provides lasting durability and a clean cut, even in thick grass. The adjustable cutting heights further enhance their versatility, allowing users to select the perfect height for their lawn.

In terms of technology, both models come equipped with the innovative "Cargo" feature, providing additional storage for tools and supplies. This practical addition makes it easy for users to carry whatever they need while mowing or performing lawn maintenance tasks. The easy-to-use controls and comfortable seating ensure that users can enjoy a smooth and ergonomic mowing experience without fatigue.

Another notable characteristic of these Snapper models is the easy maintenance feature. With a simple design that allows for easy access to the engine and cutting deck, routine maintenance such as oil changes, blade sharpening, and belt inspections can be performed quickly and efficiently.

Additionally, both the Snapper 7555 and 8560 include Snapper’s patented "Pivoting Front Axle," which enhances maneuverability and traction on uneven terrains. This technology helps to maintain consistent contact with the ground while minimizing the risk of scalping the grass.

In summary, the Snapper 7555 and 8560 represent a blend of power, efficiency, and user-friendly features. With their robust engines, durable cutting decks, and innovative technologies, these riding lawn mowers are designed to meet the diverse needs of homeowners and professional landscapers alike, making them an excellent investment for anyone looking to enhance their lawn care experience.