Checks Before Each START-UP

Controls & Operation

GENERAL OPERATION

1.Make sure all safety guards are in place and all nuts, bolts and clips are secure.

2.Check the fuel supply. Fill the tank no closer than 1/4 to 1/2 inch of top of tank to provide space for expan- sion. See your engine owner’s manual for fuel recom- mendations.

3.Check the auger control (see A, Figure 4) for proper operation. If adjustment is required, see the service section (pages 13-15) for procedures.

4.Check the chute direction control (B, Figure 4) for proper operation. The discharge chute should rotate freely in both directions. See the service section for adjustment procedures and troubleshooting.

5.Check the chute deflector (C, Figure 4) for proper operation. The deflector should pivot freely up and down. See the service section for procedures.

6.Position the chute at the desired starting direction and set the deflector at the desired angle.

7.Make sure the clean-out tool is mounted in the stor- age position on the snow thrower.

DANGER

Never run engine indoors or in enclosed, poorly ventilated areas. Engine exhaust contains CARBON MONOXIDE, an ODORLESS and

DEADLY GAS.

DANGER

DO NOT clean out discharge chute with hands. Contact with moving parts in the chute will cause serious injury. Use clean-out tool provided with machine.

WARNING

OPERATIONAL WARNINGS

Clearing The Discharge Chute

To avoid serious injury, do not put your hands into the auger housing or discharge chute. If the auger stalls or chute becomes plugged, use the following procedure to remove objects or clear the chute:

1.Release the auger control.

2.Shut off the engine.

3.Remove the key.

4.Wait for all moving parts to stop.

5.Use the clean-out tool to remove foreign objects and clear the chute or auger. Never put your hands into the auger or discharge chute.

6.If servicing is needed, remove cover and disconnect spark plug wire.

Discharge Chute Adjustment

Release the auger control and make sure the auger has STOPPED before rotating the discharge chute or adjusting the deflector. DO NOT place hands near the auger while the engine is running.

Thrown Objects

Objects can be thrown by the snowthrower while it is in operation. Thrown objects could cause serious injury to the operator or bystanders. Always wear safety goggles or other suitable eye protection. Keep people and pets away from the area.

Slope Operation

For your safety, operation on slopes should be in an up and down direction only. If it becomes necessary to move across the face of a slope, use caution and do not activate the auger. Be very careful when changing direction on a slope.

Proper winter footwear is recommended for the operator to help prevent slipping. Never attempt to clean snow from slopes. The maximum slope for any operation is 17.7% (10º).

Do not use the snowthrower on surfaces above ground level such as the roof of a building.

5201m, 5201e specifications

The Snapper 5201m and 5201e are cutting-edge lawn mowers designed to deliver exceptional performance, efficiency, and ease of use. These models cater to both residential and commercial users, offering powerful options for diverse mowing needs.

One of the standout features of the Snapper 5201m is its industry-leading 190cc Snapper engine, which provides ample power for tackling tough grasses and uneven terrains. This powerful engine ensures consistent performance, allowing users to cut through thick grass with ease. The Snapper 5201e also boasts a robust engine, designed for reliability and durability, ensuring that it can handle regular use with minimal maintenance.

Both models feature an innovative adjustable cutting deck that can be easily customized to achieve various cutting heights. This flexibility allows users to maintain their lawns exactly as they desire, whether they prefer a close cut or a higher trim. The cutting deck itself is made from high-quality materials, providing robustness while ensuring a lightweight design for easier maneuvering.

Another remarkable characteristic of the Snapper 5201m and 5201e is their easy-start technology. Equipped with an advanced starting system, these mowers eliminate the frustration of traditional pull-start engines. Users can expect a smooth and hassle-free ignition with each use, making gardening tasks more enjoyable.

Additionally, these models integrate user-friendly features such as a comfortable and ergonomic handle, which not only improves control but also reduces fatigue during extended mowing sessions. The adjustable handle height is designed to accommodate various user preferences, enhancing comfort and usability.

Safety is paramount in these designs; thus, both mowers are equipped with an automatic blade stop feature. This ensures that the blades cease operation when the user releases the control, minimizing risk and enhancing safety during operation.

The Snapper 5201m and 5201e also emphasize compact storage. Their foldable handles allow for reduced storage space when not in use, making them an ideal choice for homeowners with limited garage space.

Ultimately, the Snapper 5201m and 5201e combine power, convenience, and advanced technologies to provide an exceptional mowing experience. With their durable construction, ease of use, and flexibility in performance, these models are excellent choices for anyone seeking to maintain a pristine lawn effortlessly.