Snapper 520E manual Fuel and OIL Mixture, Proper Fuel Mixing Procedure

Page 12

FUEL AND OIL MIXTURE

The snowthrower uses a two cycle engine that requires a mixture of fuel (gasoline) and oil for lubrication of engine bearings and other moving parts.

The correct fuel/oil mixture ratio is 50 to 1. Use fuel/oil mixture chart shown.

NOTE: To prevent damage to engine, carefully observe recommended fuel to oil mixing ratio and procedures.

•Gasoline and oil must be premixed in a clean fuel container.

•Always use fresh, unleaded, winter grade fuel.

•Never put plain, unmixed fuel into fuel tank. Shake fuel container each time before filling fuel tank.

•Never use “stale” fuel left over from last season or stored for long periods.

•DO NOT USE MULTI VISCOSITY OILS, SUCH AS 10W-30 or 10W-40.

PROPER FUEL MIXING PROCEDURE

1.Fill approved clean fuel container one quarter full with fresh unleaded fuel - one quart (one liter) in a one gallon (4 liter) container.

2.Pour recommended amount of high quality two cycle oil — 2.5 ounces (80 ml) into fuel container for one gallon (4 liters) of fuel. (NOTE: DO NOT USE

MULTI VISCOSITY OILS, SUCH AS 10W-30 or 10W-40.)

3.Reinstall cap on the fuel container and shake con- tainer vigorously so oil mixes with gasoline.

4.Unscrew cap and fill container with fuel. Shake con- tainer again.

5.Remove fuel tank cap and carefully pour mixed fuel into the fuel tank, filling to 1/2 inch (1.5 cm) below filler neck to allow room for expansion. Never put plain, unmixed fuel into fuel tank. Shake fuel con- tainer each time before filling fuel tank.

Controls & Operation

WARNING

Gasoline is highly flammable and must be handled with care. Follow these fuel handling precautions:

•Use an approved fuel container.

•DO NOT run the unit indoors. DO NOT fill fuel tank indoors or while engine is running.

•Allow engine to cool for at least ten minutes before refueling.

•Wipe up any spilled fuel before starting the engine.

•Fuel vapors can travel to distant ignition sources. Keep fuel and fuel vapors away from ignition sources.

FUEL TO OIL MIXTURE CHART (50:1)

U.S.

Imperial

Metric

Gasoline 2 Cycle Oil Gasoline 2 Cycle Oil Gasoline 2 Cycle Oil

Gallons

Ounces

Gallons

Ounces

Liters

Milliliters

1

2.5

1

2.8

4

80 ml

2

5

2

5.6

8

160 ml

5

13

5

14.1

20

400 ml

A

B

 

C

 

D

Figure 7. Proper Fuel Mixing Procedure

A.Fill Container with 1 Quart (1 Liter) of fuel

B.2.5 Ounces (80 ml) of two-cycle oil

C.Combine in container, then shake container

D.Additional fuel brings total to 1 Gallon (4 liters)

11

Page 11 Page 13
Image 12
Page 11 Page 13
Contents OPERATOR’S Manual Table of Contents Safety Rules & Information Safety Rules ChildrenProduct Identification ID TagCE Identification TAG Markings 169XXXXSafety Rules & Information International SymbolsSafety Decals Assembly Procedure Tools RequiredClean-Out Tool Snowthrower ControlsAuger Control Deflector ControlsControls & Operation Engine & Starting ControlsElectric Start Units Only All ModelsChecks Before Each START-UP Operational WarningsProper Fuel Mixing Procedure Fuel and OIL MixtureMulti Viscosity OILS, Such AS 10W-30 or 10W-40 Starting the Engine Stopping the EngineManual Recoil Starting Steps Operating the Snowthrower Snowthrowing TipsAfter Each USE OFF-SEASON StorageRemoving Belt Cover LubricationEngine Lubrication Removing Engine Cover Remove and/or Loosen Cover ScrewsTroubleshooting & Service Auger Control Cable AdjustmentCarburetor Adjustment Replacing the Drive Belt Replacing the Scraper BladeServicing the Spark Plug Specifications Parts & Accessories

520E specifications

The Snapper 520E is a versatile and efficient lawn mower that combines innovative technology with user-friendly features to provide an exceptional mowing experience. Designed for homeowners who value performance and reliability, the Snapper 520E stands out in its category with a range of advanced functionalities that make lawn maintenance not only easier but also more enjoyable.

One of the key features of the Snapper 520E is its robust engine. Powered by a reliable Briggs & Stratton engine, it delivers ample power to tackle even the toughest grass conditions. The engine is designed for easy starting, ensuring that users can get to work without the frustration of hard-to-start equipment.

Another notable characteristic of the Snapper 520E is its cutting technology. The mower features a 21-inch steel cutting deck that allows for a clean and precise cut. The deck's design promotes optimal airflow, which enhances grass clipping discharge, ensuring a well-manicured lawn every time. Users can also adjust the cutting height with ease, thanks to the conveniently positioned height adjustment lever, providing flexibility to cater to different grass types and preferences.

The Snapper 520E is equipped with the latest in mower technology, including a rear-wheel drive system that improves traction on uneven terrain. This feature allows the user to navigate slopes and inclines more easily, resulting in a smoother mowing experience. Additionally, the mower's foldable handlebars make storage a breeze, allowing users to save space when the mowing season is over.

Safety is paramount in the design of the Snapper 520E. The mower comes with a blade brake that stops the blades quickly and safely when the user releases the handle, minimizing the risk of accidents.

Moreover, the Snapper 520E is known for its durability. Constructed from high-quality materials, it can withstand the rigors of regular use while maintaining performance over time.

In summary, the Snapper 520E is a well-rounded lawn mower designed for efficiency, ease of use, and safety. Its powerful engine, exceptional cutting performance, advanced technologies, and sturdy construction make it an excellent choice for homeowners wanting to achieve a flawless lawn with minimal effort. Whether tackling small or large yards, the Snapper 520E proves to be a reliable partner in maintaining beautiful outdoor spaces.
Top Page Image Contents