Boss Audio Systems BV7320 user manual Unit Installation

3.During JPEG playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows:

>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT

During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu.

*During JPEG playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, STEP, AUDIO, RDM, INT and A-B.

*In JPEG mode,the other operations are same as ones in MP3/WMA mode.

5.16 MP4 Operation

1.The root menu will display on the monitor when it begins to switch to DISC mode, then it will automatically play the first file.

During playback, press the STOP button to stop playing and return to the root menu.

2.When displaying the root menu, press the direction buttons to select your desired FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the selected file.

When displaying the root menu, you can also use the number buttons to select the

serial number of the file and play the file.

*The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid in this mode.

*The other functions are same as ones in DVD disc; but the RPT function is same as one in MP3/WMA.

5.17 ESP and ID3 Function

There is ESP function for all formats of discs.

In MP3/WMA mode, during playback, the information of the file name, folder name, songs title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not.

5.18 USB and MMC/SD Reader Operation

Power on the DVD player, then insert the USB storage or MMC/SD Card(first flip down the front panel), and then the monitor will display the root menu of the USB storage or MMC/SD Card.

All the operations are same as ones of the corresponding format. When you want to pull out the card, first push it, and then pull it out.

5.19 The DVD System Menu Setup Operation

1.Press the SETUP button on the remote control to access the DVD System Menu on the monitor.

2.There are 6 setup pages in all for the System Menu. Press the > or < button to select a desired setup page.

3.Press the ^ or v button to select an setup item in the selected setup page.

4.Press the > button to enter the setup item. Then press the v or ^ button to select a

desired mode of the setup item, finally press the OK button to confirm it.

*Press the < button to return to the upper level.

*Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu.

1.8 UNIT INSTALLATION

INSTALLATION INSTRUCTIONS

THE UNIT INSTALLATION IS ANTI-THEFT ONE. THE UNIT

CHASSIS WEARS A SLIDING METAL HOUSING. FIRSTLY

CONNECT THE POWER LINES, SPEAKER LINES AND

AUTO ANTENNAACCORDING TO MANUAL REQUIREMENT,

THEN INSTALL THE SLIDING METAL HOUSING IN A CAR

ACCORDING TO THE DIAGRAM.

	TO BOOST UP THE CAPABILITY OF
	ANTI-JAMMING, PLEASE FIX THE
	METAL STRAP ON THE METAL
METAL STRAP	CONNECTED TO THE CHASSIS OF
	THE CAR.
		SELECT THE PROPER TABS
		OF THE SLIDING METAL
		HOUSING TO FIX THE
		SLIDING METAL HOUSING.

	UNIT CHASSIS
DASH BOARD		PLASTIC TRIM OUT
SLIDING METAL HOUSING

FRONT PANEL

TO DRAW THE CHASSIS OUT OF THE

SLIDING METAL HOUSING, INSERT

THE LEFT AND RIGHT KEY PLATES

INTO THE TWO SIDES OF CHASSIS.

NOTE

REMOVE THE DECK TRANSPORT

SCREWS BEFORE INSTALLING IT.

REMOVE THE SLIDING METAL HOUSING

EJECT BUTTON

RESET BUTTON

PDF created with FinePrint pdfFactory trial version http://www.pdffactory.com