Murray 615000x30NA owner manual Before Operation

Page 3

IMPORTANT

SAFE OPERATION PRACTICES FOR WALK–BEHIND SNOW BLOWER DO NOT OPERATE THIS EQUIPMENT BEFORE READING THIS MANUAL

Read entire owner’s manual before attempting to assemble or operate this Snowthrower.

Before Operation

SRead and understand this manual. Become familiar with the Snowthrower and all its controls.

SExercise caution to avoid slipping or falling, especially when operating in reverse.

SKnow how to stop quickly.

SKEEP CHILDREN AWAY – Keep bystanders a safe distance from work area.

SNever allow children to operate the Snowthrower. Never allow adults to operate the equipment without proper instruction.

SRemove mats, boards, sticks, wire or any foreign objects which can be picked up and thrown by the Snowthrower. Do not use on gravel surface.

SDo not wear lose clothing or jewelry. They could be caught in moving parts.

SDo not operate the equipment without wearing adequate winter outer garments. Wear footwear which will improve your footing on slippery surfaces.

SWear rubber boots that don’t leak when operating the Snowthrower.

SWARNING: TO PREVENT ELECTRICAL SHOCK use only with an extension cord suitable for outdoor use and in usable condition. Extension cords are available at your local service center.

SInspect the Snowthrower. If any part is damaged, have it inspected by your local Service dealer before operating.

SMake sure impeller will spin freely before attaching to power source.

SIf impeller will not rotate freely due to frozen ice, thaw unit thoroughly before attempting to operate under power.

SUse only with a receptacle that has been installed in accordance with local inspection authorities and wired for 110/120V, 10/20 AMP outdoor service.

SDO NOT USE OVERLOADED CIRCUIT.

SMaintain Snowthrower with care. Follow instructions contained in this manual.

SNever attempt to make adjustments while the motor is running (except where specifically recommended by manufacturer).

STo prevent disconnection of Snowthrower from extension cord during operation follow the instructions for securing the extension cord contained in this manual.

SKeep bystanders away from the area of operation.

SAvoid accidental starting. Don’t carry plugged in Snowthrower with finger on switch. Be sure switch is off when plugging in.

SIf Snowthrower is to be left unattended, remove key and disconnect from power source.

SIf extension cord is damaged in any way while plugged in – pull extension cord from wall receptacle. Replace damaged cord immediately

SWARNING: DON’T ABUSE CORD – never carry Snowthrower by cord or yank cord to disconnect from receptacle. Keep cord from heat, oil and sharp edges.

SKeep hands and feet away from moving parts. Keep clear of discharge opening at all times.

SDon’t force Snowthrower. It will perform better and safer at the rate for which it was designed.

SDon’t overreach. Keep proper footing at all times.

SIf Snowthrower strikes a foreign object:

a.Stop immediately

b.Disconnect from power source.

c.Inspect for damage.

d.Repair any damage before restarting.

SOperate Snowthrower only in adequate light – never in the dark.

SNever direct snow discharge chute toward glass enclosures, automobiles, or bystanders. Keep children and pets away.

SNever discharge snow onto public roads or near moving traffic.

SNever attempt using the Snowthrower on a roof.

SNever operate the Snowthrower near window wells, drop–offs, etc.

SAlways be sure of your footing, and keep a firm hold on the handle.

SWalk, never run.

SDisconnect power cord and remove key whenever you leave the operating position, before cleaning, or maintaining Snowthrower.

Preparing for Storage

SRemove residue ice or snow from impeller by briefly running motor out of snow.

SDisconnect from power source and remove key.

SStore Snowthrower indoors, in dry, locked place, out of reach of children.

Observe Caution Decals Located On Motor Housing.

SThe use of any other accessory or attachment might increase the risk of injury to the user.

SWhen servicing use only genuine factory replacement parts and accessories.

SFor safe operation in snow use only CONTINUOUS power cords without cuts or cracks in insulation and without taped splices or mechanical plugs that could seep moisture.

This safety alert symbol identifies important safety messages on machines and in manu- als. When you see it, be alert to the possibility of personal injuries or damage to unit. Fol- low all instructions in these safety messages.

F-031061C

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents CHASSE-NEIGE Manuel D’UTILISATIONProduct Specifications Table of ContentsBefore Operation Assembly AssemblyShipping Carton Plastic Probe Inside Right Handle Carriage Bolt 031061C Snow Thrower Operating Controls OperationTo Start Operating InstructionsClearing Obstructed Impeller or Discharge Chute Discharge Direction AdjustmentReplacing Impeller Blades MaintenanceDrive Belt Replacement Lubrication031061C 031061C Model 615000x30NA Description Decals Not ServiceableDonnées Techniques Table DES MatièresAvant l’utilisation Assemblage Carton d’expéditionMontage Sonde de plastique Intérieur du manche droit Fonctionnement Commandes DU CHASSE-NEIGEMise en marche FonctionnementDans ce manual Réglage de l’orientation de la goulotte d’éjectionRemisage Remplacement des lames de l’impulseurReplacement de la curroie d’entraînement Lubrification031061C BILLIOUS, INC

615000x30NA specifications

The Murray 615000x30NA is a high-performance circuit breaker designed for both residential and commercial applications. Known for its reliability and efficiency, this model offers a comprehensive solution for power distribution and protection. It is particularly favored for its ability to safeguard electrical circuits from overload and short circuits, making it an essential component in modern electrical systems.

One of the standout features of the Murray 615000x30NA is its trip mechanism, which employs advanced thermal and magnetic technology. This dual-functionality ensures that the breaker responds quickly to electrical faults, minimizing potential damage to wiring and connected devices. The thermal element responds to sustained overloads, while the magnetic trip acts swiftly in the case of short circuits, providing a balanced approach to circuit protection.

Moreover, the breaker is designed with user convenience in mind. Its compact design allows for easy installation in various electrical panels, ensuring that it fits seamlessly into existing setups. The front-mounted test button makes it easy for users to verify the operational status of the breaker, enhancing safety by allowing regular checks without the need for specialized tools.

In terms of specifications, the Murray 615000x30NA is rated for a maximum voltage of 120/240 VAC, making it suitable for most typical home and small business applications. The 30-amp rating is ideal for circuits powering standard household appliances and can handle a variety of loads, from lighting to larger machinery.

Another key characteristic of this model is its durability. Built with high-quality materials, the Murray 615000x30NA is engineered to withstand the rigors of everyday use, ensuring a long operational life. Additionally, it meets stringent UL and CSA standards, providing peace of mind that it adheres to recognized safety protocols.

The Murray 615000x30NA circuit breaker is also compatible with various electrical systems, thanks to its design that allows for easy integration with existing wiring configurations. This versatility makes it a popular choice among electricians and contractors.

In conclusion, the Murray 615000x30NA circuit breaker stands out for its reliability, operational efficiency, and user-friendly features. With its advanced trip technology, durable construction, and compatibility with various systems, it remains a go-to solution for effective circuit protection in both residential and commercial environments.
Top Page Image Contents