Poulan 192046 owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector

Page 16

SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute defl ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the defl ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

•To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 23)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

 

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

 

 

LOCKNUT

AUGER HUB

AUGER SHAFT

FIG. 23

TO REMOVE BELT COVER (See Fig. 24)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

•Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 24

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model Number Snow ThrowerTraining PreparationOperation Static Electricity HazardMaintenance and Storage API SG-SLService and Adjustments Parts Packed Separately in Carton14-15 16-18Assembly / PRE-OPERATION HOW to SET UP Your Snow ThrowerRemove Snow Thrower from Carton Unfold Upper HandleInstall Auger Control ROD See Figs Install Discharge Chute / Chute Rotater Head See FigInstall Weight BAR See Fig Install Chute Deflector Remote Control See FigsCheck Tire Pressure Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Electric start button used for starting the engineHOW to USE Your Snow Thrower StoppingUsing the CLEAN-OUT Tool See Fig Power Steering Operation See FigTo Throw Snow See Fig To Move Forward and Backward See FigScraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Maintenance General RecommendationsBefore Each USE LubricationCleaning EngineService and Adjustments To Adjust Snow Thrower HeightChute Deflector Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Limited Warranty

192046 specifications

The Poulan 192046 is a versatile and powerful chainsaw designed for both homeowners and professionals. Engineered to provide reliable performance, this chainsaw stands out due to its combination of effective cutting capabilities and user-friendly features.

At the heart of the Poulan 192046 is its robust 2-cycle engine, designed to deliver impressive power while maintaining efficiency. This engine is capable of producing a significant amount of torque, ensuring that users can tackle a variety of cutting tasks with ease. Whether you’re trimming branches, felling trees, or cutting firewood, the engine provides the muscle needed for consistent performance.

One of the standout features of the Poulan 192046 is its easy-start system, which minimizes the effort required to get the chainsaw running. The innovative starting mechanism reduces resistance, making it easier for both novice and experienced users to start the saw quickly and efficiently.

Incorporating a 16-inch guide bar, the Poulan 192046 offers an ideal balance of reach and maneuverability. This length is perfect for various cutting tasks while still being manageable for users. The chain is designed for effective cutting, with sharp teeth that provide clean cuts through different types of wood.

Safety is a critical consideration in chainsaw design, and the Poulan 192046 addresses this with its safety features. The chainsaw is equipped with a chain brake that helps stop the chain in the event of kickback, preventing potential injuries. Additionally, the ergonomic handle provides a comfortable grip, allowing users to maintain control during operation.

The automatic oiling system is another advantageous feature of the Poulan 192046. This system ensures that the chain remains lubricated during use, extending the life of the chain and bar while promoting smoother cuts. The easy access to the oil reservoir allows for quick and hassle-free refills, keeping the saw operable for extended periods.

Lightweight yet durable, the Poulan 192046 is designed for extended use without unnecessary fatigue. Its overall design considers balance and weight distribution, allowing for comfortable handling even during prolonged operations.

In summary, the Poulan 192046 chainsaw combines a powerful engine, user-friendly features, and essential safety mechanisms to deliver a reliable cutting tool for various tasks. Its effective design and thoughtful technologies make it a preferred choice for homeowners and professionals seeking efficiency and performance in their chainsaw.
Top Page Image Contents