Poulan 188047 owner manual HOW to USE Your Snow Thrower, Stopping

Page 10

OPERATION

The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear

safety glasses or eye shields while operating 00155 your snow thrower or performing any adjust- ments or repairs. We recommend standard safety glasses

or a wide vision safety mask worn over spectacles.

HOW TO USE YOUR SNOW THROWER

Know how to operate all controls before adding fuel or attempting to start the engine.

STOPPING

TRACTION DRIVE

•Release traction drive control lever to stop the forward or reverse movement of the snow thrower.

AUGER

•Release the auger control lever to stop throwing snow.

ENGINE

1.Move throttle control to “STOP” position.

2.Remove (do not turn) safety ignition key to prevent unauthorized use.

NOTE: Never use choke to stop engine.

TO USE FUEL SHUT-OFF VALVE (See Fig. 11)

The fuel shut-off valve is located beneath the fuel tank on the engine. Always operate the snow thrower with the fuel shut-off valve in the OPEN position.

OFF

OPEN

FIG. 11

TO USE THROTTLE CONTROL (See Fig. 12)

The throttle control is located on the engine.Always operate the snow thrower with the engine at full throttle. Full throttle offers the best snow thrower performance.

FAST

SLOW

TO USE CHOKE CONTROL (See Fig. 13)

The choke control is located on the engine. Use the choke control whenever you are starting a cold engine. Do not use to start a warm engine.

•To engage choke, turn knob clockwise. Slowly turn knob counterclockwise to disengage.

OFFFULL

FIG. 13

TO CONTROL SNOW DISCHARGE (See Fig. 14)

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

WARNING: If the discharge chute or auger become clogged, shut-off en- gine and wait for all moving parts to stop. Use a stick, NOT YOUR HANDS, to unclog the chute and/or auger.

The DIRECTION in which snow is to be thrown is controlled by the discharge chute control lever.

•To change the discharge chute position, press down- ward on discharge chute control lever and move lever left or right until chute is in desired position. Be sure lever springs back and locks into desired position.

The DISTANCE that snow is thrown is controlled by the position of the chute defl ector. Set the defl ector low to throw snow a short distance; set the defl ector higher to throw snow farther.

•Press downward on chute defl ector control lever and move lever forward to lower the defl ector and decrease the distance. Move lever back to raise the defl ector and increase the distance. Be sure lever springs back and locks into desired position.

FIG. 12

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Model Number Snow ThrowerOperation TrainingPreparation Static Electricity HazardMaintenance and Storage API-SF-SJ14-15 Service and AdjustmentsParts Packed Separately in Carton 16-18Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsInstall Chute Deflector Remote Control See Figs Install Discharge Chute / Chute Rotater Head See FigCheck Tire Pressure Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo Throw Snow See Fig Power Steering Operation See FigTo Move Forward and Backward See Fig Scraper BAR Before Starting the EngineTo Start Engine Before Stopping Snow Throwing TipsIf Recoil Starter has Frozen Before Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Limited Warranty

188047 specifications

The Poulan 188047 is a powerful and versatile chainsaw designed to tackle a range of cutting tasks with efficiency and ease. Known for its robust construction and user-friendly features, this chainsaw has become a popular choice among both homeowners and professionals.

One of the standout features of the Poulan 188047 is its engine power. Equipped with a 42cc two-cycle engine, it provides ample power for cutting through tough materials. The engine is designed for optimal performance, offering a balance of power and fuel efficiency, making it an excellent tool for both light trimming and heavier cutting tasks.

In terms of design, the Poulan 188047 features a lightweight build which enhances maneuverability, allowing users to handle it comfortably for extended periods. The ergonomic design includes an anti-vibration handle that reduces fatigue, enabling operators to work more efficiently. The front guard is also designed to provide extra protection, ensuring safety during operation.

One of the key technologies incorporated in the Poulan 188047 is its easy start system. This innovation simplifies the starting process, making it accessible for users of all experience levels. The chainsaw also utilizes a tool-less chain tensioning system, allowing for quick adjustments without the need for additional tools. This feature saves valuable time, especially during larger cutting jobs when frequent adjustments may be necessary.

Another important characteristic of the Poulan 188047 is its 18-inch guide bar. This size strikes a balance between agility and reach, making it suitable for cutting firewood, felling small to medium-sized trees, and completing landscaping tasks. Coupled with its low-kickback chain, users can operate the chainsaw with confidence, knowing they have a reliable, safe cutting tool at their disposal.

The Poulan 188047 also features an automatic oiling system that lubricates the chain and bar during operation, prolonging the life of the chainsaw and ensuring smooth cutting performance. This system not only enhances durability but also minimizes the maintenance needed, allowing users to focus on their tasks without worrying about constantly checking oil levels.

In summary, the Poulan 188047 encapsulates a blend of power, convenience, and safety features that cater to a wide array of cutting needs. Its user-friendly technologies and ergonomic design make it a trusted choice for those seeking efficiency in their cutting tasks, whether at home or on the job site. With the Poulan 188047, users can expect reliable performance and ease of use, making it a valuable addition to any toolkit.
Top Page Image Contents