Poulan 185156 owner manual Training, Preparation, Operation, Static Electricity Hazard

Page 2

SAFETY RULES

Safe Operation Practices for Snow Throwers

IMPORTANT: This machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death.

Look for this symbol to point out im- portant safety precautions. It means CAUTION!!! BECOME ALERT!!! YOUR SAFETY IS INVOLVED.

WARNING: Always disconnect spark plug wire and place it where it cannot contact plug in order to prevent acci- dental starting when setting up, trans- porting, adjusting or making repairs.

WARNING: This snow thrower is for use on sidewalks, driveways and other ground level surfaces. Caution should be exercised while using on sloping surfaces. Do not use snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

WARNING: Snow throwers have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thrown from the discharge chute. Keep the area of operation clear of all persons, small children and pets at all times including startup.

CAUTION: Muffler and other engine parts become extremely hot during operation and remain hot after engine has stopped. To avoid severe burns on contact, stay away from these areas.

WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemi- cals known to the State of California to cause cancer and birth defects or other reproductive harm.

TRAINING

•Read the operating and service instruction manual carefully. Be thoroughly familiar with the controls and the proper use of the equipment. Know how to stop the unit and disengage the controls quickly.

•Never allow children to operate the equipment. Never allow adults to operate the equipment without proper instruction.

•Keep the area of operation clear of all persons, par- ticularly small children and pets.

•Exercise caution to avoid slipping or falling especially when operating in reverse.

PREPARATION

•Remove foreign objects. Thoroughly inspect the area where the equipment is to be used and remove all doormats, sleds, boards, wires, rocks & landscaping.

•Disengage all clutches before starting engine (mo- tor).

•Do not operate the equipment without wearing ade- quate winter outer garments. Avoid loose, dangling clothing, such as scarves, which can get caught in rotating parts. Wear footwear that will improve footing on slippery surfaces.

•Handle fuel with care; it is highly fl ammable.

-Never smoke while refueling.

-Use an approved fuel container.

-Never remove fuel tank cap or add fuel to a running engine (motor) or hot engine (motor).

-Fill fuel tank outdoors with extreme care. Never fi ll fuel tank indoors.

-Replace fuel cap securely and wipe up spilled fuel.

-Never store fuel or snow thrower with fuel in the tank inside of a building where fumes may reach an open flame or spark.

-Check fuel supply before each use, allowing space for expansion as the heat of the engine (motor) and/or sun cause fuel to expand.

STATIC ELECTRICITY HAZARD -

-Never fi ll containers inside a vehicle or on a truck or trailer bed with a plastic liner. Always place containers on the ground, away from your vehicle before fi lling.

-When practical, remove gas-powered equipment from the truck or trailer and refuel it on the ground. If this is not possible, then refuel such equipment on a trailer with a portable container, rather than from a gasoline dispenser nozzle.

-Keep the nozzle in contact with the rim of the fuel tankopening at all times, until refueling is complete. Do not use a nozzle lock-open device.

-If fuel is spilled on clothing, change clothing im- mediately.

•For all units with electric starting motors use electric starting extension cords certified CSA/UL. Use only with a receptacle that has been installed in accordance with local inspection authorities.

•If snow thrower must be operated over gravel surface, use extra caution and be sure skid plates are adjusted to lowest (highest scraper clearance) position.

•Never attempt to make any adjustments while the engine (motor) is running (except when specifi cally recommended by manufacturer).

•Let engine (motor) and snow thrower adjust to outdoor temperatures before starting to clear snow.

•Always wear safety glasses or eye shields during op- eration or while performing an adjustment or repair to protect eyes from foreign objects that may be thrown from the snow thrower.

OPERATION

•Do not operate this machine if you are under the infl u- ence of alcohol or taking drugs or other medication which can cause drowsiness or affect your ability to operate this machine.

•Do not use this machine if you are mentally or physically unable to operate this machine safely.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Model Number Snow ThrowerOperation TrainingPreparation Static Electricity HazardMaintenance and Storage API-SF-SJ14-15 Service and AdjustmentsParts Packed Separately in Carton 16-18Remove Snow Thrower from Carton Assembly / PRE-OPERATIONHOW to SET UP Your Snow Thrower Unfold Upper HandleInstall Traction Drive Control ROD See Figs Install Auger Control ROD See FigsCheck Tire Pressure Install Discharge Chute / Chute Rotater Head See FigInstall Weight BAG See Fig Operation Know Your Snow ThrowerMeets A.N.S.I. Safety Requirements Recoil auxiliary starter handle used for starting the engineHOW to USE Your Snow Thrower StoppingTo Throw Snow See Fig To Move Forward and Backward See FigTo Start Engine Before Starting the EngineScraper BAR If Recoil Starter has Frozen Snow Throwing TipsBefore Stopping Before Each USE MaintenanceGeneral Recommendations LubricationCleaning EngineChute Deflector Service and AdjustmentsTo Adjust Snow Thrower Height Shear Bolts See FigTo Replace Belts See Fig Storage OtherTroubleshooting Page Repair Parts Control Panel / Discharge Chute 183334 Knob, Lever Repair Parts Snow Thrower Model Number P524ESA Handles Repair Parts Drive Washer, Flat Chassis / Engine / Pulleys Repair Parts Wheels / Decals Repair Parts Limited Warranty

185156 specifications

The Poulan 185156 is a robust and versatile chainsaw designed for both residential and light commercial use, making it an excellent choice for homeowners, landscapers, and hobbyists alike. Engineered with a focus on power and ease of use, it delivers reliable performance for a variety of cutting tasks, from felling small trees to pruning branches and clearing brush.

One of the standout features of the Poulan 185156 is its powerful engine. Equipped with a reliable 18-inch guide bar, it provides ample cutting length to tackle larger logs and limbs with relative ease. The chainsaw's engine is designed to offer a balance of power and efficiency, ensuring that users can get the job done without constantly refueling. This is particularly beneficial for those who have larger areas to manage or for projects that require extended use.

The Poulan 185156 incorporates several innovative technologies to enhance the user's experience. One notable feature is its Easy Start system, which reduces the effort needed to start the engine. This is especially helpful for users who may struggle with traditional pull-start mechanisms. Additionally, the chainsaw features an automatic oiling system that ensures the chain and bar are properly lubricated during operation, resulting in smoother cuts and extended tool life.

Safety is also a primary consideration in the design of the Poulan 185156. The chainsaw is equipped with a chain brake system to prevent unwanted chain movement, enhancing user safety during operation. The comfortable grip and lightweight design contribute to reduced user fatigue, making it easier to handle for prolonged periods.

Durability remains a key characteristic of this chainsaw. Constructed with high-quality materials, it is built to withstand the rigors of outdoor use. The solid construction ensures that the Poulan 185156 can handle tough tasks while maintaining its performance over time.

In conclusion, the Poulan 185156 is a dependable chainsaw packed with features and technologies that prioritize performance, efficiency, and user safety. With its powerful engine, innovative starting system, and effective safety features, it stands out as a valuable tool for homeowners and professionals alike. Whether for landscaping, tree maintenance, or general yard work, the Poulan 185156 delivers the quality and reliability expected from a top-tier chainsaw.
Top Page Image Contents