Installation—Fuses and Wiring (cont.)
Mono Subwoofer Operation
When the amplifier is configured for mono operation, use the speaker output terminals marked for mono use.
WARNING! Subwoofer impedance must not fall below 2 ohms when in MONO mode.
| MONO |
L | R |
SPEAKER OUTPUT
Setup Tuning—Full-range Speakers
1) Music
The material chosen for head unit/amplifier system setup must be both clear in recording quality and dynam- ic in amplitude. Many audiophile “test” discs have musical tracks with both of these characteristics and should be used.
2) Input Sensitivity Control |
|
|
Turn control all the way counterclockwise (minimum position). In this position, |
| 0.2 |
the amplifier will be less sensitive to the input signal from the head unit. | INPUT SENSITIVITY | 2.6 |
|
| 5 |
3) Highpass & Lowpass Crossover Controls
Crossovers should be turned “OFF” during this phase of setup. Move the HIGHPASS and LOWPASS switches to the “OFF”
OFF |
|
|
|
|
|
| ON | OFF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HIGHPASS |
|
|
|
|
|
|
|
| ||||
|
|
|
| LOWPASS | |||||||||
ON
| 350 |
| 350 | LOWPASS SLOPE | ||
|
|
|
| |||
185 | Hz | 200 | Hz | 12dB12dB 24dB | ||
ST | MONO | |||||
|
|
|
| |||
| 20 |
| 50 |
|
| |
Highpass Crossover Control | Lowpass Crossover Control | Lowpass Slope Control |
12