Safety Rules, Training, Preparation | Woods Equipment ST500 guide

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Safety is a primary concern in the design and manufacture of our products. Unfortunately, our efforts to provide safe equipment can be wiped out by an operator’s single careless act.

In addition to the design and configuration of equipment, hazard control and accident preven- tion are dependent upon the awareness, concern, judgement, and proper training of personnel involved in the operation, transport, maintenance and storage of equipment.

It has been said “The best safety device is an informed, careful operator.” We ask you to be that kind of operator.

TRAINING

Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call 1-800-319- 6637.) Failure to follow instructions or safety rules can result in serious injury or death.

If you do not understand any part of this manual and need assistance, see your dealer.

Know your controls and how to stop engine and attachment quickly in an emergency.

Operators must be instructed in and be capable of the safe operation of the equipment, its attach- ments, and all controls. Do not allow anyone to operate this equipment without proper instructions.

Never allow children or untrained persons to operate equipment.

PREPARATION

Check that all hardware is properly installed. Always tighten to torque chart specifications unless instructed otherwise in this manual.

Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hair, hands, hearing, and head; and respirator or filter mask where appropriate.

Make sure attachment is properly secured, adjusted, and in good operating condition.

Make sure the driveline spring-activated locking collar slides freely and is seated firmly in power unit PTO groove. Make sure the set screws securely attach driveline to the attachment gearbox shaft.

The safety interlock system was installed for your protection. Do not disconnect, disable, over- ride, or execute any action that would cause this system to malfunction. If malfunction occurs, stop all operation and contact dealer for repair.

Make sure all safety decals are installed. Replace if damaged. (See Safety Decals section for location.)

Make sure shields and guards are properly installed and in good condition. Replace if damaged.

When using weight transfer system, correct counterweight must be used to maintain stability. See counterweight chart in power unit manual or contact dealer.

When equipped with ROPS, total vehicle weight with all equipment, ballast, and operator must not exceed 2,590 lbs.

Inspect and clear area of stones, branches, or other hard objects that might be thrown, causing injury or damage.

OPERATION

Never place any part of the body underneath implement/attachment or between its moving parts even when the engine has been turned off. Service work does not require going underneath unit. Mechanical failures, electrical failures, or operating controls can cause equipment to drop.

Never place hands or body into discharge chute or auger to unclog. Stored energy can cause auger to quickly rotate when unclogging occurs and cause severe injury or amputation. Stop engine, remove key, disconnect driveline, and carefully unclog, using a sturdy piece of wood.

Keep bystanders away from equipment.

Never direct discharge toward people, animals, or property.

Do not operate or transport equipment while under the influence of alcohol or drugs.

Operate only in daylight or good artificial light.

Keep hands, feet, hair, and clothing away from equipment while engine is running. Stay clear of all moving parts.

4Safety

ST500 Snowblower SR (Rev. 1/2/2007)

ST500 specifications

The Woods Equipment ST500 is a versatile and robust compact utility tractor designed to meet the needs of both commercial users and residential property owners. With a focus on power, efficiency, and user comfort, the ST500 has quickly become a favorite in the small tractor market.

At the heart of the Woods ST500 is its powerful engine, delivering exceptional performance that allows it to tackle a variety of demanding tasks. The tractor is equipped with a high-efficiency diesel engine, which not only ensures strong torque output but also enhances fuel efficiency, minimizing operational costs while maximizing productivity. The engine is coupled with a hydrostatic transmission, providing smooth transitions and effortless control, making it ideal for both novice and seasoned operators.

One of the standout features of the ST500 is its robust hydraulic system. This system allows the tractor to support a wide range of attachments, providing flexibility in its application. From loaders and backhoes to mowers and tillers, the ST500 can easily handle almost any job on the farm, garden, or landscaping site. The high-lift loader capacity further enhances its utility, allowing users to lift heavier loads with confidence.

Comfort is also a priority in the design of the Woods ST500. The spacious operator platform is designed ergonomically, offering easy access to controls while minimizing operator fatigue during long hours of use. Additionally, the ROPS (Roll Over Protective Structure) enhances safety, ensuring that operators can work confidently even in challenging situations.

Another impressive characteristic of the ST500 is its four-wheel drive capability, which provides enhanced traction on uneven or slippery terrain. This feature makes it an excellent choice for a variety of conditions, from muddy fields to snow-covered driveways. The maneuverability of the tractor is further augmented by its compact size, allowing it to navigate tight spaces with ease.

In terms of build quality, the ST500 showcases the durability that Woods Equipment is known for. With a rugged frame and high-quality materials, the tractor is designed to withstand the rigors of daily use, making it a reliable investment for any user.

Overall, the Woods Equipment ST500 stands out as a powerful and versatile compact tractor, ideal for anyone looking to enhance their productivity while enjoying the benefits of advanced technology and operator comfort. With its range of features, robust performance, and user-friendly design, the ST500 is engineered to meet the demands of modern agricultural and landscaping applications.