Yard-Man 7200-0 Chute Cable Replacement Or Repair, Remove the Blower HOUSIN~ from the Machine

Page 14

CHUTE CABLE REPLACEMENT

OR REPAIR

1.REMOVE THE BLOWER HOUSIN~ FROM THE MACHINE.

A.Remove the ~ain guard and disconnect the reel drive chain at the chain connecting link.

B.Re!:':1°vethe !.Ou! carriage-bolts, fastening the scoop

to the mounting brackets. Remove the: scoop and

,

-.,' .,,'"

.'

reel assembly' intact.' Do not remove~~ mounting

"-

". .",. c-

brackets from frame straps.

--

C.Remove the spring pin and remove fan;

"."'- .-.',c"".

D.Loosen chute chain-to allow for removal of blower

housing.

E.Remove the blower housing fromthe_unit;;-

2.REMOVETHE WORNCABLE.

A.Place the blower housing on a bench with the cable

pulley exposed..

B.Remove the cable roller cover.

C.Loosen the lock bolt on top of the cable roller bracket and adjust the'cable adjusting bolt and cable roller in as far aspossible.

D.Lift the cable pulley away from the blower housing :c. approximately 3 inches.

E.Loosen the cable mounting bolt and remove the'cable ends from the cable pulley.

F.Loosen the nut on the cable washer which holds the c. cable to the upper spout assembly and remove the

worn cable.

3.REPLACENEWCABLE.:

,.

A.Fasten a loop in center of the cable under the cable washer making certain that both ends of the cable are even.

B.With the cable crossed, wrap each end of the cable around the upper spout.

4.PLACING THE NEW CABLE OVER THE CABLE

ROLLERS.

A. Rotate the upper spout assembly with the discharge side in the opposite direction from the cabie pulley side of the blower housing.

B. Extend the cable from the right si~e of the upper spout assembly over the roller on the left side of the cable roller bracket and through the left cable hole in the top of the blower housing. Extend the cable from the left side of the spout assemblyacross the center cable roll~r. back and around the cable adjustment roller and over the cable roller on the right side of the

cable roller bracket and down to the right hole in the top of the blower housing.

C. Turn the cable pulley with the cable bolt toward the bottom of the blower housing.

,

, " .'\

'

.

D.Put the ends of the cable up through the holes in the bottom of the cable pulley and crossthe ends up and over the cable bolt and under the washer. Pull the cable tight and tighten the'~ble bolt and nut, making sure the cable remains in the track around the cable pulley.

E.Slide cable pulley back into place.

F.Tighten cable with adjusting cable bolt.

5.REPLACE THE BLOWER HOUSING

A. Reversethe steps outlined in Step 1 to replace the blower housing and parts to the Snow Thrower.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BOX36940 CLEVELAND,OHIOPage MA1NTENANc8109b MaintenanceCE~ General SNOW~THROWINGUnpacking SET-UPStarting Beforestarting EngineEngine Stopping the EngineMASTERCLUrCH Control AdjustmentsOperation of Controls Discharge Chute and SpoutShift Panel Adjustment Replacing Safety Shear BoltChute Chain AND-ADJUSTMENT Chute Cable AdjustmentPage Page Parts List MODEL7200-0Parts List GearIdler Linkage Adjustment Idler Pulley AdjustmentLubrication Changing EngineoilLubricationpoints END of Season StorageChute Cable Replacement Or Repair Remove the Blower HOUSIN~ from the MachinePage Snow THROWERyou

7200-0 specifications

The Yard-Man 7200-0 is a versatile and powerful lawn mower designed for homeowners who seek efficiency and ease of use in their lawn care routine. It stands out in the market due to its robust features and advanced technologies, making it a preferred choice for both amateur and experienced gardeners.

At the heart of the Yard-Man 7200-0 is its reliable 21-inch cutting deck, which offers ample width for mowing larger areas while still being manageable in smaller spaces. The cutting deck is constructed from durable materials that ensure longevity and resilience against the wear and tear of regular use. Furthermore, the mower includes multiple cutting height adjustments, allowing users to customize their lawn cutting experience according to the types of grass and environmental conditions.

One of the most notable features of the Yard-Man 7200-0 is its powerful engine. Equipped with a 4-cycle engine, this mower provides enough torque to tackle even the thickest grass and tough terrains. Users will appreciate its ability to deliver consistent power without the hassle of mixing fuel, making it a convenient option for those who prefer gas-powered equipment.

In addition to its powerful performance, the Yard-Man 7200-0 also incorporates advanced technology aimed at enhancing user comfort and efficiency. The self-propelled system allows for easy maneuverability across various terrains, reducing strain on the user during extended mowing sessions. With variable speed settings, the mower adapts to the user's walking pace, ensuring a smooth and controlled mowing experience.

Another feature worth mentioning is its innovative grass bagging system. The Yard-Man 7200-0 comes with a rear bagger that efficiently collects grass clippings, promoting a cleaner finish to the lawn. The bag can be easily detached and emptied, making lawn maintenance less of a chore.

In terms of design, the Yard-Man 7200-0 is user-friendly with an ergonomic handle that adjusts for comfort, catering to individuals of all heights. Its compact design allows for easy storage in sheds or garages, while the durable wheels ensure stable movement over uneven ground.

Overall, the Yard-Man 7200-0 is an excellent combination of power, technology, and user-centric features, making it an ideal choice for anyone serious about maintaining a pristine lawn. With its solid build and thoughtful design, it promises to deliver reliable performance season after season.
Top Page Image Contents