Craftsman 486.24441 Step !2 see Figure, Mount ROD, NUT L Front, Channel Assembly

Page 8

STEP !2: (SEE FIGURE 12)

. insert the round hook end of the angle lock spring up through the hole in the spring mount bracket.

insert the angle lock bars down through the slot in the channel. Underneath the channel, place a 1" long spacer (U) on each side of the angle lock bars and insert a 1/4" x 3ol/4" bolt (A) through the channel, angle lock bars and the spacers. Secure the bolt with a 1/4" nylock nut (J). Tighten so that lock bars can pivot freely.

At this time tighten the 3/8" carriage bolt and hex nut previously assembled to angle lock bars.

NOTE: When the angle lock bars are pulled back in slot, the pivot plate should unlock and be free to 3ivot to the right or left position.

PUVOT

SPRUNG

 

MOUNT

 

PLATE

 

 

 

CHANNEL

 

 

1/4" NYLOCK

 

 

NUT (J)

ANGLE

 

LOCK

 

SPBmNG

 

-_:_0 _"-1/4"

x 3ol/4"

1"SPACERS

HE×

BOLT (A)

FIGURE 12

(Right Hand

Side View

STEP 13: (SEE FIGURE 13)

Using a hammer, assemble a 3/8" palnut (S) onto one end of the spring mount rod. Insert the other end of the spring mount rod through the pivot plate using the rear set of holes. Support the assembled end of the spring mount rod on a block of wood, and assemble the remaining palnut onto the other end of the rod.

3/8" PALNUT (S) _

_SPRING

MOUNT

ROD

PLATE

3/8"PALNUT (S)

STEP 14: (SEE FIGURE 14)

,Assemble a 3/8" x 1ol/4" carriage bolt (E) through the square hole in the cable mount bracket and through the square hole in the angle lock bars. (The carriage bolts should face in opposite directions.) Using pliers

hold the cable mount bracket in position, angling down towards the LH. hole in the channel as shown in

figure 10. Secure with a 3/8" nylock nut (L). Tighten.

Refer to the figure for the correct angle for the cable mount bracket.

318" x 1-1/4" CARRmAGE BOLT (E)

ALUGN

CABLE

 

MOUNT

BBACKE1

ANGLE

 

L.BHOLE.

LOCK

3/8" NYLOOK

 

NUT (L)

FRONT

FIGURE 14

(Right Hand Side View

STEP 15: (SEE FIGURE 15)

. Assemble one 5/16" jam nut (I) approximately 3/4" onto threaded end of control cable that has no rubber cap or preassembled nuts. Assemble threaded cable end through round hole in cable mount bracket and secure with another 5/16" jam nut (I). Tighten.

NOTE: Some adjustment of jam nuts may be required after blade assembly is completed.

BRACKET314"

CABLE MOUNT

CHANNEL ASSEMBLY

FIGURE 15

(Left Hand Side View)

FIGURE 13

(Top View)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Operators IVianuai Model No, 48&24441 ONE Year Full Warranty Weight Bracket Snow CAB For Draw BAR TiRE ChainsSpecial USE only REF. QTY. DESCRIPT!ONCarton Contents Loose Parts in Carton Parts iN Packages not Shown Full SiZETools Required for Assembly Instructions for Tractors WroTHSINGLEFront Deck Suspension Bracket See FigureINSTRUCTiONS for Type a Tractors INSTRUCTiONS for Type B TractorsType a Front Suspension Bracket Washer LINSTRUCTiONS for Alltractors Angle SupportNylock NUT L Carriage Bolt E \Channel Assembly Step !2 see FigureMount ROD NUT L FrontCotter O NUT JBottom Lock Release Grupassembly Cable END Cable ENDHOW to USE Your Snow Blade Knowyour Snow BladeTo Pivot the Blade Pull Back Push Down to Raise BladeCheck for Worn or Damaged Parts Clean BladeCheck for Loose Fasteners To Adjust Blade Spring Recommendations When StoringTo Adjust the Blade Pivot Lock Mechanism Blade ShoeProblem Cause Correction Page Page Page Repair Parts for Model 486.24441 42 Snow Blade Part Part QTY Description NO=Call anytime, day or night U.S.A. and Canada Call anytime, day or night U.S.A. only

486.24441 specifications

The Craftsman 486.24441 is a versatile and reliable lawn tractor designed to tackle a variety of landscaping tasks, making it an invaluable tool for homeowners and gardening enthusiasts. This lawn tractor combines power, precision, and convenience, offering features that cater to different lawn care needs.

One of the standout features of the Craftsman 486.24441 is its robust engine. Powered by a reliable Briggs & Stratton engine, the lawn tractor delivers exceptional power, enabling it to handle tough mowing conditions with ease. With a 42-inch cutting deck, it allows for efficient grass cutting, ensuring that larger areas can be mowed quickly while maintaining a clean and manicured finish. The cutting height can be easily adjusted, giving users the flexibility to achieve the desired lawn height.

User comfort has been taken into consideration in the design of the Craftsman 486.24441. The tractor is equipped with an adjustable high-back seat that provides ample support for longer mowing sessions, reducing fatigue and ensuring a comfortable ride. The ergonomic steering wheel and controls are designed for ease of use, allowing for smooth maneuverability and better handling on different terrains.

One of the innovative technologies featured in the Craftsman 486.24441 is its automatic transmission system. This feature eliminates the need for manual gear shifting, allowing users to focus solely on steering and mowing. The machine seamlessly adjusts the speed according to the terrain, providing a more comfortable experience while ensuring optimal performance.

Additionally, this lawn tractor boasts a range of optional attachments, enhancing its functionality beyond just mowing. Users can equip the Craftsman 486.24441 with accessories such as tow-behind cultivators, baggers, and leaf sweepers, making it a multipurpose machine capable of handling various gardening tasks throughout the year.

The Craftsman 486.24441 is also designed with durability in mind. Its heavy-duty steel frame ensures stability and longevity during operation, while its painted finish protects it against the elements, preventing rust and wear over time.

With easy maintenance features, including a straightforward oil change mechanism and accessible parts for servicing, the Craftsman 486.24441 ensures that owning and operating this lawn tractor is a hassle-free experience. Overall, the Craftsman 486.24441 stands out as a reliable and versatile choice for anyone looking to maintain their lawn efficiently and effectively.
Top Page Image Contents