Connections

NOTE: Power is always supplied to the subwoofer electronics unless it is unplugged or switched to the off position using the power toggle switch located in the lower left corner of the rear panel. The auto-on circuitry only activates or deactivates the power amplifier. Make sure your subwoofer and receiver are unplugged when making the connection.

Line level: Use one of the “line level in” jacks with most systems. These inputs accept the line-level signal from your receiver’s subwoofer output. When using the “use crossover control” input, the subwoofer’s circuitry filters out the high frequencies and sends the remaining low frequencies to the subwoofer power amplifier.

Speaker level: Use these high-level terminals with receivers that do not have subwoofer output. The speaker inputs

accept both left and right channel speaker signals from your receiver. NOTE: Certain receivers use speaker grounding circuits that may be incompatible with external powered audio products, such as powered subwoofers. When speaker wire is used instead of line level cables, this incompatibility can sometimes result in an audible hum when the receiver is turned off or switched to a different speaker channel. See page 8 for more information.

How to Connect Using the Speaker Terminals

We recommend 18-gauge wire or thicker for runs up to 15 feet (4.5m), and 16-gauge wire or thicker for longer runs. Separate the first few inches of the wire conductors. Strip off 1⁄ 2-inch (12mm) of insulation from the ends of each speaker wire to expose the two conductors and tightly twist the wire strands.

WARNING: To prevent electrical shock hazard, always switch off the amplifier or receiver when making connections to the speaker.

When making all connections, be sure to connect the + (red) on the speaker to the + (red) on the amplifier, and the – (black) on the speaker to the – (black) on the amplifier.

–

IMPORTANT: Typically, one side of the wire is smooth. Connect this side to the – (black) connection. The other side has a rib or stripe. Connect this to the + (red) connection.

Using the five-way binding posts: The binding posts permit easy connection to banana plugs, spade lugs, and bare wire. Insert the wire in the hole (as shown on left) or a 3/8-inch spade lug over the post and tighten. For banana plugs, remove the red and black caps from the end-holes and insert either dual or single banana plugs (as shown on right).

Using This Manual – PV700 versus PV900

NOTE: The rear amplifier panels of the PV700 and the PV900 are virtually the same. Although the instructional images on the following pages depict the PV700’s rear panel, the PV900 connects, functions and operates in exactly the same manner.

PV900, PV700 specifications

Boston Acoustics is known for its commitment to delivering high-quality audio products, and the PV900 and PV700 models are no exception. These speakers represent a blend of innovative technology and exceptional sound quality, ideal for both casual listeners and audiophiles alike.

The Boston Acoustics PV900 is a powerful floor-standing speaker that stands out due to its dynamic sound performance and elegant design. Featuring a dual 8-inch bass driver, the PV900 delivers deep, richlow frequencies, providing an immersive listening experience. This model includes a high-efficiency 1-inch tweeter, ensuring crisp highs that balance out the deeper tones, making it suitable for various music genres and movie sounds.

One of the main features of the PV900 is its use of proprietary BassTrac technology. This technology minimizes distortion during playback, allowing for clean and accurate sound reproduction, even at high volumes. The speaker's cabinet is constructed with a rigid and well-damped enclosure, which further enhances sound clarity and reduces unwanted resonance. The PV900 is also compatible with a range of receivers and amplifiers, making it an adaptable choice for any home theater system.

The PV700, on the other hand, is a compact bookshelf speaker that doesn't compromise on sound quality despite its smaller size. It is equipped with a single 6.5-inch woofer and the same high-efficiency 1-inch tweeter as the PV900, providing a well-rounded audio experience that can effectively fill a room. The PV700’s smaller footprint makes it particularly appealing for users with limited space, while still offering impressive sound performance.

Both the PV900 and PV700 feature Boston Acoustics’ advanced driver technology, which ensures clear and precise sound reproduction across the frequency spectrum. This results in a more natural listening experience, with excellent vocal clarity and instrument separation. The aesthetic design of both models also complements modern home decor, with a sleek finish and elegant lines.

In summary, the Boston Acoustics PV900 and PV700 are exemplary models that showcase the brand's dedication to quality sound and innovation. With features such as BassTrac technology, well-constructed enclosures, and high-efficiency drivers, they cater to audio enthusiasts looking for superior performance in their home audio systems. Whether you're enjoying music or watching films, these speakers promise an enriching auditory experience.