Massey Ferguson L&G 1694404 manual Maintenance, Schedule For Normal Care, Lubricate Snowthrower

Page 11

Schedule For Normal Care

Care Required

Schedule

Clean snow and ice from

After each use.

snowthrower.

 

Grease Auger Zerks **

Every 25 hours &

 

before seasonal storage

Grease Drive Chain **

Every 25 hours &

 

before seasonal storage

Grease Drive Shaft **

Every 10 hours &

 

before seasonal storage

Check Auger Gear

Every 25 hours

Gear Box Oil***

 

Lube Chute & Blower ***

Every 25 hours &

 

before seasonal storage

 

 

*Use 30 Weight Engine Oil

**Use Automotive Lithium Grease

***Use Simplicity Winter Weight Worm Gear Oil

Lubricate Snowthrower

Maintenance

WARNING

To avoid serious injury, perform maintenance on the tractor or snowthrower only when the engine is stopped, parking brake is set and all moving parts have stopped. Always remove the ignition key before beginning maintenance or adjustments to prevent accidental starting of the engine.

MAINTENANCE

In general, linkage connections and other parts that have partial rotational or sliding movement should be lubricat- ed periodically with SAE 30 weight oil. Avoid applying excessive amounts of oil or grease since this may cause a build-up of dirt around the lubricated area, making sub- sequent lubrication more difficult to accomplish.

Figure 2. Lubricate Snowthrower

9

Image 11
Contents Two-Stage Snowthrower OPERATOR’S ManualPage Table of Contents Safety Rules & Information Children Safety RulesSafety Decals Safety DecalsTractor Controls Safety InformationRequired Accessories Recommended AccessoriesPage Operating On Slopes OperationControls Checks Before StartingOperation Lubricate Snowthrower MaintenanceMaintenance Schedule For Normal CareCheck Auger Gearbox Oil Level Lubricate Discharge ChuteDrive Shaft Lubrication Lubricate Auger ShaftReversing Scraper Bar AdjustmentsSkid Shoe Adjustment Inspect Scraper BarProblem Possible Corrective Cause Action TroubleshootingInstall Front Hitch Initial InstallationInitial Installation Install Long Drive Shaft Electric Chute Rotator Gear Mount Cable GuideAssemble Discharge Chute Check Auger Gear Box Oil Levels Attach Short Drive Shaft to Drive Chain BoxSecure Cables Snowthrower Installation Snowthrower InstallationSnowthrower Installation Snowthrower & Hitch Removal Snowthrower & Hitch RemovalMounting Remote Deflector Control Remote Deflector Control TemplateRemote Deflector Control Template Hardware Identification & Torque Specifications