Husqvarna ST 151 Starting the Engine, Electrical cord can become damaged, causing a shock or fire

Page 9

OPERATION

Starting the Engine

1.Push key in (Figure 11).

2.Move choke lever to left position.

3.Firmly push in the primer 2 times with your thumb, holding the primer in a for a second before releasing it each time.

NOTE: Remove your glove when you push in the primer so that air cannot escape from the primer hole.

IMPORTANT: It may not be necessary to use the primer or the choke if the engine has been running and is hot. Excessive priming may flood the engine and prevent it from starting.

3

1

2

1

Figure 13

1. Electric start button

Figure 11

1.Key

2.Choke lever

3.Primer

4.Pull the recoil starter (Figure 12) or if your snow thrower is equipped with an electric starter, connect an exten- sion cord to the snow thrower and plug the other end into a three-hole grounded 110 volt A.C. receptacle and push the electric-start button (Figure 13).

1

Figure 12

1. Recoil start handle

NOTE: Use an extension cord recommended for outdoor use that is not longer than 50 feet (15 m).

The electrical cord can become damaged, causing a shock or fire.

Thoroughly inspect the electrical cord before plug- ging it into a power source. If the cord is damaged, do not use it to start the snowthrower. Replace or repair the damaged cord immediately. Contact an Authorized Service Dealer for assistance.

IMPORTANT: Run the electric starter no more than 10 times at intervals of 5 seconds on, then 5 seconds off. Running the electric starter extensively can overheat and damage it. If the engine does not start after this series of attempts, wait at least 40 minutes to allow the starter to cool before attempting to start it again. If the engine does not start after the second series of attempts, take the snowthrower to an Authorized Service Dealer for service.

NOTE: If you pull the recoil handle and feel no resistance, the starter may be frozen. Thaw out the starter before attempting to start the snowthrower.

5.While the engine is running, move the choke lever slowly to the right position.

6.Unplug the extension cord from the power source and the snowthrower (Figure 13).

Unplug the power cord whenever you are not start- ing the snowthrower.

9

Image 9
Contents 115 68 Operator’s ManualSafe Operation Practices for Walk-Behind Snow Throwers TrainingPreparation Maintenance and Storage OperationClearing a Clogged Discharge Chute Know Your Snow Thrower Table of ContentsSetup AssemblyInstalling the Handle Loose PartsInstalling the Discharge Chute ProcedureFilling the Engine with Oil Product Overview Product OverviewOperation OperationFilling the Fuel Tank Checking the Engine Oil LevelStarting the Engine Electrical cord can become damaged, causing a shock or fireEngaging the Auger Blades Adjusting the Discharge Chute and Chute DeflectorDisengaging the Auger Blades Stopping the EngineClearing a Clogged Discharge Chute Preventing Freeze-up After UseOperating Tips Maintenance MaintenanceAdjusting the Control Cable Adjusting the Control CableChanging the Engine Oil Inspecting the Auger Blades/ Scraper BarServicing the Spark Plug Inch 76 mm Replacing the Drive Belt Storage StorageTroubleshooting TroubleshootingService Notes Consumer Wheeled Products Limited Warranty HOW to Obtain Service Consumer Wheeled Limited Warranty Chart Armor Protected Stamped Deck Shell Example Below 07/09/2014 TH/AP
Related manuals
Manual 24 pages 36.51 Kb

ST 151 specifications

The Husqvarna ST 151 is a well-known snow blower designed to tackle winter's toughest challenges while ensuring ease of use and reliability. Aimed primarily at homeowners with medium-sized driveways and sidewalks, this equipment combines innovative features with powerful performance, making it an ideal choice for anyone looking to manage snow efficiently.

One of the standout features of the ST 151 is its compact and lightweight design. Weighing in at just around 121 pounds, it allows for easy maneuverability, ensuring users can navigate tight spaces and corners without hassle. This makes it especially appealing for residential users who need to clear snow from narrow driveways or pathways. The unit is powered by a reliable 1.6 kW engine, providing robust performance that allows it to tackle various snow conditions while maintaining excellent efficiency.

The ST 151 is equipped with a durable auger and efficient throwing mechanism, which together work to quickly and effectively clear snow. The auger is designed to collect snow efficiently, while the impeller throws the snow up to 33 feet away, allowing for impressive snow displacement. This feature is particularly useful for users living in areas where heavy snowfall is common, as it reduces the need for repeated passes.

Another noteworthy aspect of the Husqvarna ST 151 is its adjustable discharge chute. The user-friendly lever allows for easy manipulation of the chute direction, enabling operators to control where the snow is thrown. This functionality enhances overall efficiency and allows for effective snow management without the risk of damaging surrounding areas.

For added convenience, the snow blower comes equipped with an easy-start system, which allows for reliable ignition even in cold weather. This is complemented by its ergonomic controls, including a comfortable grip, allowing users to operate the machine with minimal effort. The wheels are designed for optimal traction, ensuring stability and control on slippery surfaces.

Safety is also a priority with the Husqvarna ST 151. The snow blower includes features designed to keep the user secure while operating the machine, further enhancing the overall user experience. With its combination of power, efficiency, and user-friendly design, the Husqvarna ST 151 stands out as an excellent choice for homeowners looking to maintain their property during the winter months. Its commitment to durability and performance makes it a reliable partner in snow removal tasks.